I bought a Savage LRH in .308 Winchester
The good news: It shoots several 150/155 grain bullets (Interbond, Berger, Lapua, Nosler and Sierra) into groups of .5" to .6" at 100 yards. It shoots 125 Speer TNT's into .25"!

The bad news: I found that the barrel touches the Accu-stock on the left side about 2" from the end. I took the action out and it looks fine but when I put it back and tighten the front action screw the tang sticks out above the stock at the back about 1/4 to 3/8 inch. The barrel touches even more. If I tighten the rear screw first it seats like it did from the factory.

Do I call Savage and send it back (the web site and catalog says this is free floated)? It is a "shooter" but it is also not right?