Any tips for getting these screws flush to the contour of the barrel?
Here is what they were:
Here they are now:
Last edited by concepthomes1; 08-05-2013 at 10:16 PM.
Carefully contour them with good sharp file. Go slow and take light passes. You put can scotch tape on the barrel with holes cut for the screws to stick through. If the file touches the tape you within a few thousandths then you can draw file to smooth them up.
Bill
Each morning eat a live green toad, it will be the worst thing you'll have face all day.
Picked up a diamond file set and got to work.
[IMG][/IMG]
[IMG][/IMG]
Some small shallows around the screw holes will easily be filled with a nice coat of Duracoat. Stay tuned.
I just filled mine with JB weld and sanded them down before Cerakote. Never know they were there but could easily be drilled out and retapped.
That is a great idea using the jb weld or whatever.It isnt permanant that way. Thanks for the idea.
Willing to give back for what the sport has done for me!
Members who have read this thread in the last 1 days: 0
Posting Permissions
Reply With Quote
Bookmarks