Results 1 to 3 of 3

Thread: Savage 11 Hog Hunter w/Model 12 HS Precision Stock?

  1. #1
    rangewolf
    Guest

    Savage 11 Hog Hunter w/Model 12 HS Precision Stock?


    Will this work?... Both seem to have the 4.4" Short action spacing
    Here is an example of the stock HERE

  2. #2
    Basic Member BoilerUP's Avatar
    Join Date
    Nov 2010
    Location
    Floyd Co, IN
    Age
    40
    Posts
    1,100
    Yes, it will work.

    However, as you know the stock pictured is for a single-shot 3-screw target action (PSV106). You'd probably want the PSV118, which is for a 4.41" model but uses Savage factory DBM (part number 106238, $68 from Savage) and assuming your rifle is a 308, a magazine (55105, $46 from Midway).

    You could also elect to use a CDI or Accurate-Mag DBM, as both reportedly work in an HS Precision inlet.

  3. #3
    stangfish
    Guest
    I have one in the stock that Boiler up describes. I have the older Wyatt/SSS magazine setup on it though.

Similar Threads

  1. Replies: 12
    Last Post: 03-31-2016, 10:26 AM
  2. Need stock for precision build :111 Trophy hunter
    By derek1387 in forum 110-Series Rifles
    Replies: 14
    Last Post: 11-03-2013, 08:56 PM
  3. Replies: 0
    Last Post: 03-22-2013, 11:35 AM
  4. Replies: 6
    Last Post: 12-15-2011, 08:32 PM

Members who have read this thread in the last 1 days: 0

There are no members to list at the moment.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •