stevens magazine

[calib]

i looked in the magazine of my stevens and i think it may be stagger, but does anyone know if they are center or staggers trying to figure out a stock thanks guys

[pdog06]

all new production ones are centerfeed, but you could still find a stagger if it was in a shop for a while on the rack.

2 easy ways to figure it out.
1) measure the distance between the 2 action screws that hold the action in the stock.(4.275" is staggerfeed: 4.400" is centerfeed)
2? take the action out of the stock. If the magbox is attached to the action it is a staggerfeed. If the magbox stays in the stock it is a centerfeed.

[calib]

thanks that helped a lot