Page 2 of 2 FirstFirst 12
Results 26 to 27 of 27

Thread: Handloading the Striker

  1. #26
    Rupe
    Guest

    I picked up some 130gr. Nosler B-Tips for my Striker, I have the .270 win. barrel on it and startes working up a load for it. I was using Noslers data. I loaded up 5 different loads 3 rounds per each. I had no idea that a deer hunting bullet could be so accurate. The best 3 shot group was .461 center to center the worst was 1.073 and I know I jerked the trigger a little on that one. Needless to say I have anoth er 12 rounds loaded with .1 gr. increments between the best and the second best .577" to see if I can get it any smaller. The .461" was Noslers max lload using imr 4895 working down toward the .577" group.
    I had never used Nosler BT hunting bullets before and was pleasantly surprise what they can do out of an 18" barrel.
    I was also using CCI br2 lg. rifle primers and one fired, full length sized Winchester brass.
    Oh happy day! I will report back after I shoot the next 12 rds. and let you know how it turns out.
    Rupe

  2. #27
    Rupe
    Guest
    PS I have a 4-16x42 Nikon Monarch 3 rifle scope mounted on my Striker and was shooting off a bench using a bipod and a sandbag at 100 yds. Zero wind amd about 50° at 4350 feet above sea level. I held my tongue tight against my upper front teeth, and I had the local witch doctor say a few words over my Striker before each 3 shot group. And people have doubts about mail order witch doctors jokes on them!
    Rupe

Page 2 of 2 FirstFirst 12

Similar Threads

  1. 10 FCP SR handloading question
    By trentcwwilson in forum Ammunition & Reloading
    Replies: 9
    Last Post: 03-24-2017, 06:22 PM
  2. Issues handloading
    By 647Lapua in forum Ammunition & Reloading
    Replies: 3
    Last Post: 02-28-2015, 06:04 PM
  3. 10fp 20" newbie handloading help.
    By Hougie in forum Ammunition & Reloading
    Replies: 7
    Last Post: 03-19-2012, 08:36 PM
  4. model 10 precision carbine .308 handloading info 100yds to 600yds
    By FLINCHLOCK in forum Ammunition & Reloading
    Replies: 5
    Last Post: 04-17-2011, 08:21 AM
  5. Getting started in handloading
    By JCalhoun in forum Ammunition & Reloading
    Replies: 14
    Last Post: 03-27-2011, 01:58 PM

Members who have read this thread in the last 1 days: 0

There are no members to list at the moment.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •