Trigger help

[Chaos_23]

I'm not positive that this is the right area for this, but I couldn't find a better place to ask it.
I want to adjust the trigger on my 110fp in .308 and found the thread showing instructions for a factory 3-screw trigger adjustment. Then I took my stock off and found that my trigger does not look like the one in the pictures. It's not the acutrigger, so I'm at a loss. I took these pictures when I had it apart, anybody recognize the trigger and know how to adjust it? Thanks!!

[img width=576 height=768]http://i1204.photobucket.com/albums/bb413/Chaos_273/photo5-1.jpg[/img]

[img width=576 height=768]http://i1204.photobucket.com/albums/bb413/Chaos_273/photo4.jpg[/img]

[rinodods]

Looks like an SSS competition trigger to me.

[pdog06]

yep! definately a SSS trigger.

if you can reach sharpshooter supply they should be able to email you a copy of the instructions.

[bigedp51]

Sharp Shooter Competition Trigger

http://www.sharpshootersupply.com/

[Chaos_23]

Thanks, I figured somebody here would know! I'll have to drop SSS a line for the adjustment instructions, thanks again.

[cnwwyo]

Can i put an acutrigger in my 111 30-06?

[Willoughby]

they seem to work fine on my non accu trigger savages
yes it will fit
No it is not a direct drop in

[stangfish]

Just a suggestion, study the details of the swap and other options. Safety is the primary reason for using an accutrigger with adjustability being secondary.

[jonbearman]

I think the instructions are on the sss site .You can google it rather than waste weeks waiting for the a letter to return to you.