Reply With QuoteHi have no fear get a Torx bit a T27 and tap it in, and it will dig in to the corners, then remove stripped fastener, remember now not a 25 or a 30 a 27.
Dean
PS: Do yourself a favor get rid of those factory offerings.
Im swapping stocks and stripped an action screw how can I get it out so I can put the mew stock on?
Last edited by thomae; 06-12-2013 at 05:44 AM. Reason: Changed title so it provided some information.
Hi have no fear get a Torx bit a T27 and tap it in, and it will dig in to the corners, then remove stripped fastener, remember now not a 25 or a 30 a 27.
Dean
PS: Do yourself a favor get rid of those factory offerings.
RUMs are like woman in Stiletto heals, you know they are going to put you in the poor house, but that has never stopped anyone from pursuing them.
Thanks can I get that at the hardwear store?
Nevermind I just found one in me tool box didnt know what it was called
Now throw away or sharpen those stripped out allen wrenches and take care of them from now on. All the corners need to be sharp.
How did you make out with your dilemma.
Dean
RUMs are like woman in Stiletto heals, you know they are going to put you in the poor house, but that has never stopped anyone from pursuing them.
It worked great after I figured out what the t27 was and that I had it on my bench. I was swapping to a choate I got, had to do a little dremel work to get it to fit. First time i've done any of this but it all works. Thanks for the help.
Just currious, what kind of dremel work was needed?
Had to open it up a bit to drop the trigger guard in.
Posting Permissions
Bookmarks