I finally got to the range to start breaking in my new FCP-K .308. I made up 30 rounds with some components I had (not what I intend to shoot) I used Hornady 165 gr. Interbond Boat tail over 46 grs. IMR 4350,cci 200 primer, Winchester brass. I first cleaned the barrel then bore sighted ( bolt out, look through barrel, adjust scope). This is my first heavy barrel .308 and hopefully I started the barrel breaking properly. This is what I have done so far, 1shot,clean,1shot,clean,1 shot, clean,3 shots, clean,3shots, clean, 3 shots, clean, 5 shots, clean, 5 shots, clean,5 shots, clean. 27 shots so far. First 3 shots at 50 yds. just to get on paper were a clover leaf. At 100 yds. it opened up considerably. 5 shot groups were 2". I put a Bushnell banner 6-24x40 on because I had it lying around. It will get a Vortex 4-16x50 once I get the funds together. I also want to load up some 168 gr. SMK's once I can find some. Any advice is appreciated. Thanks Doug