My first wildcat build on a savage 110

[wilpenny]

[img width=563 height=450]http://i797.photobucket.com/albums/yy251/wilpenny/1266199551.jpg[/img]





[img width=563 height=450]http://i797.photobucket.com/albums/yy251/wilpenny/1266198258.jpg[/img]

This is my first build on the savage its a 338-06AI in a thumbhole stock by Richards microfit a SS trigger and SS recoil lug safety and SS trigger guard rosewood end cap and grip cap Leo bases and rings topped with a swift 6x18x44 milldot scope the first target is at 100 yards and that's the first 5 shots down the tube. the second is at 25 rounds and done after cleaning two shot groups enjoy I'm shooting 225 hornady spt with 60 grains of win 760 with a mag primer

[okie2]

NICE NICE Nice
you did a great job
what is the other 2 laying there

[BrentWin]

Very nice, but its a shame that termites keep eating holes thru the grips of your stocks. ;D

[wilpenny]

okie the other two that are laying there are a browning a bolt eclipse in 300short mag with a night tactical scope on it 4x16x56 mildot . Richards microfit stock the other is a mark x Mauser in 338 win mag I'm about to build the other barrels are for the savage they run from 7mm 6.5 mm and 25 cal the gun is set up with the 338-06 AI at the moment but i can swap out in less than 10 Min's

Enjoy