Anyone have a problem with the chamber on their newer savage rifles having very rough chambers to the point of hurting the brass? Ill put up a picture when I Get done with work. But the 308 model 10 fcp-sr and the 338 lapua both do it. In running lapua brass in the 338 and Norma in the 308. Thanks guys!
Shotgun bore mop & polishing compound. Polish it up & clean it out thoroughly. I had to do it to a brand new Axis I bought last year. Steel wool wrapped around a bore mop of brush works good too.
This is, of course, pending it is a rough, scratchy chamber.....
'Scuse me while I whip this out...!
What frank said. Should clean it up in short order.
I like a chamber brush with some scothchbright wrapped around it with some polishing compound mixed in for the mess.
SCOTCHBRITE?!?!?!????Originally Posted by stangfish
Did I ever tell you about the time I ruined a $8000 piece of specially coated glass using Scotchbrite? It had some kind of melted goop on it & I figured - hard to remove? use something a little abrasive...
Then the guy told me about the coating on the glass.
I'm scared of Scotchbrite. Only used in extreme situations that're very rough & of the non-glass / silica variety.
'Scuse me while I whip this out...!
LOL OK, Glass, Coatings, Butter!?!?!?!?! Most of my barrels are harder than 1018. For what it is worth most chambers are not a 2 rms.
Posting Permissions
Reply With Quote
Bookmarks