HS Precision, bolt not opening, torque and assembly spec

I was wondering if there were some answers to my problem.
Well I have the model 10 with the HS precision stock that it came with from the factory and I took the gun apart to clean it and see whats going on in there. The screws came out at 40in lbs. After I assembled it, i went to rack the bolt and it moves up fine, but will only move back maybe 1/8inch. I then tried lowering the torque setting and no change. I've tried front screw first then the back screw and vice versa. The only way to get the bolt to function properly is with less than 10in lbs on the rear screw and the front screw doesnt matter. To me, this cant be right at all. I only use quality factory ammo and have put maybe 30-40 rounds through it. So my questions for all of you are, what am I doing wrong? What should be checked? And what is the assembly procedure and torque settings for this rifle?
I'm just really confused. Any help is appreciated. Thanks.