I have a Stevens 200 with a SSS comp trigger that I installed myself about 2 months ago. Went in fine with no trouble. Very nice trigger. I just got a Savage 10FP McMillan with the Accutrigger and 3 position safety and thought the blade was very weird so I put in a Rifle Basix Sav-1. I like the SSS trigger much better and tried swapping the triggers and the RB fits fine in the Stevens, but I can not get the SSS to fit in the Savage. I cant get the holes to line up. I am looking through the SSS manual and there is a diagram showing that a .625" x .570" notch needs to be removed from the trigger bracket, however there is no mention of why this needs to be done. I did not need to do it when I installed the trigger in the Stevens. Is this something that needs to be done when replacing the Accutrigger? I tried emailing and calling SSS numerous times and they are not getting back to me. any help would be appreciated. thanks