hello been doing a bunch of research on the board and I just want to run things by you guys to make sure everything adds up.

for starters i'm attempting to build a switch barrel rifle which in time I hope will be in a vast array of calibers. I'm planning on using a 110 Flat back Long action with a .473 bolt face (E serial prefix) 3 screw trigger. I also have a magnum bolt face and small firing pin. currently have barrels in .308, .260, and .338 edge

now this is where things get confusing for me. my next cartridge will be on a .378 bolt face. from what i'm reading i'll need a "firing pin adapter" from SSS and a modified bolt face? or will the small pin magnum firing pin work? I will also need a .223 bolt baffle to lessen the bolt throw from what I read.

also I read that I can run center feed mags on a stagger feed action by getting a centerfeed stock and profiling the ramp in the action to match up?

any insight or advice would be greatly appreciated.