Float the tang?
Should I free float the safety tang on my new B&C Medalist stock? Everything else fit great.
I would if it is hitting. If the tang hits the stock before the rear screw area of the action it could bind the action as you tighten it up.
A little sandpaper of lightly with a dremel should take care of it, then just dab a couple coats od tru-oil or some other clear on it to seal it and make the color match the rest of the stock again(when you sand it the color will lighten up).
”I have a very strict gun control policy: if there’s a gun around, I want to be in control of it.”
~Clint Eastwood
Members who have read this thread in the last 1 days: 0
Posting Permissions
Reply With Quote
Bookmarks