Do a search of the forums and you will find your answer - basically file the notch in the ejector so it can extend a little farther and usually less important - change the ball to a larger one (the size is listed in the post when you do the search).
Question for all you barrel nut freaks. Got a model 12 in 204. When i go to extract the fired round 9 times outta 10 the empty case lays in the mag tray andwont eject. If i work the bolt fast and hard it does it about half the time. Ive cleaned and oiled the spring and ball and helped a bit but not good enough. What do i need to do?
Model 12 btv .204 nikon monarch 4-16x50<br />Model 110La 243ai 26"brux 1:8 twist sss comp trigger leupold vx3 4.5-14x40 tack driver!!
Do a search of the forums and you will find your answer - basically file the notch in the ejector so it can extend a little farther and usually less important - change the ball to a larger one (the size is listed in the post when you do the search).
So when i call SSS fred wil lead me in the right direction as to what i need ? I am gettin a trigger and couple other things.
Model 12 btv .204 nikon monarch 4-16x50<br />Model 110La 243ai 26"brux 1:8 twist sss comp trigger leupold vx3 4.5-14x40 tack driver!!
Yes, they know what you need.
Ed Bell, PA Deer Hunter & NRA Life Member ~ “The right of the citizens to bear arms in defense of themselves and the State shall not be questioned.”~
I must say you guys on here are some of the best around friendly patient and most of all very knowledgeable ;D . I have drank the kool aid got drunk now i cant walk away in fact the two remmys and one winchester i have are hittin the road only to be replaced with yes you guessed it savage!
Model 12 btv .204 nikon monarch 4-16x50<br />Model 110La 243ai 26"brux 1:8 twist sss comp trigger leupold vx3 4.5-14x40 tack driver!!
Keep the Winchester and dump the Remingtons. The Winchester may become an endangered species and very valuable in the future. If I had the money and you were selling I would take it.
El Lobo
Fred built me a new bolt for my 22-250, works perfect!
It would not eject the spent case until he built me a new bolt!
[B][SIZE=3]Dennis[/SIZE][/B]
yeah the winchester is a model 70 coyote chamber in 25 wssm just dont care for the cartridge much so thats why its goin besides workin a deal for a 6mm br in trade
Model 12 btv .204 nikon monarch 4-16x50<br />Model 110La 243ai 26"brux 1:8 twist sss comp trigger leupold vx3 4.5-14x40 tack driver!!
Bookmarks