I have a Stevens 200 25-06. Looking to swap out the factory barrel with a longer varmint/bull barrel. Anybody know where to find one of these?? Also, I'm fairly new to this website so I wasn't quite sure where to post this question. Any help would be appreciated! Thanks!
Make a call to Jim Briggs at Northland Shooter Supply. He is a sponsor here. Ask him about the CBI brand barrels or Shilen. If anyone can get you a good aftermarket barrel, Jim can. Otherwise become a paid member here so you can watch the member's only classifed section and pick up a used one. there have been a couple Savage factory take offs roll through in the past couple months.
204, 22 K-Hornet, 222, 223, 22-250, 22-250AI, 6BR, 243, 243AI, 6-06, 6-WSM, 250-3000AI, 270, 7-08, 7RM, 30BR, 308, 30-06, 375 H&H, 444 Marlin, 450BM, 458WM
http://www.mcgowenoutlet.com/prefits/savage.html
I absolutely LOVE my McGowen barrel and the prices are very good for the quality you get.
I have picked up two used Savage 25-06 varmint barrels over time in the classifieds here for very reasonable prices. Both were/are excellent shooters.
Keep an eye open for a BVSS barrel, stainless fluted and usually around 100-150 bucks. I've sold 4 of them at least.
Do I have to become a paid member to view classifieds?
Yup, its one of the perks of paid membership. You should be able to see the "Vendor Classifieds" as a non-paid member, but the "Members Classifieds" are for paid memebers only. Personally one of the best gun investments I've made. I have gotten tons of deals in there, and sold the stuff I didn't need.
204, 22 K-Hornet, 222, 223, 22-250, 22-250AI, 6BR, 243, 243AI, 6-06, 6-WSM, 250-3000AI, 270, 7-08, 7RM, 30BR, 308, 30-06, 375 H&H, 444 Marlin, 450BM, 458WM
Hopefully not too far off topic.
I'm not sure what your reasons are for wanting to swap out the barrel but I just thought I'd throw this out there. I have a 110 in my safe with a 22" sporter barrel that was very finicky and I could never find the sweet spot with my loads. This rifle was range tested quite a bit trying lots of different combinations and took plenty of whitetails with a load (IMR4350) that was shooting just under an inch and I thought that was as good as it was capable of. Then I found Reloader 22 and did a ladder test with 110gr accubonds. WOW that was the only thing that was missing all along. Now consistently under 1/2" with darn near as many bullets as I care to stack and dead center every time and it sends quite a few "custom rifle guys" either asking what I'm shooting, or redfaced and packing. I have had some very interesting trade offers at the range after letting strangers shoot her but seeing as how I put this rig together for my son when he was just a kid it won't be going anywhere.
I also have a 110FP in 25-06 with the 24"bull barrel that's a sweet shooter but again the reloader 22 made a huge difference.
If it's an accuracy thing don't count out the sporter barrels as they can be amazingly accurate and depending on the use of the rifle are a whole lot easier to handle and to hump in the field.
Just an additional $.02 opinion and maybe worth checking into.
A good wife and a steady job has ruined many a great hunter.
Members who have read this thread in the last 1 days: 0
Posting Permissions
Reply With Quote
Bookmarks