I put a Seekins 20 moa base with Seekins Medium rings on my new model 11 .308 build with a Vortex Viper PST 6-24x50. To get the rifle zeroed at 100 yds I had to travel almost to the top of my elevation travel. I now only have 24 minutes of up left, so if I didn't have the base I would only have 4 minutes left! Does anyone else have this set up or similar?

I have a 7mm Long Range Hunter with an EGW 20moa base and the same scope. It is bottomed out nicely with only a small amount of downward adjustment left with a 200 yd zero. I had hoped that this set up would be similar but it is far from it. Seekins only makes 1 Savage base and it is this one. It is a "Savage 10 FP" model. Is there a difference in the action dimensions between the 10 and the 11 that I have that would cause this? The screws lined up perfect and I like that this base has a recoil lug. Any ideas or help would be great. I have thought about shimming and bedding the base but I would rather it just worked as it should.