Results 1 to 6 of 6

Thread: Help with load

  1. #1
    omega1
    Guest

    Question Help with load


    Does anyone out there have any loads for a CBI 223 8 twist 25in bull barrel. I have tried 77gr Nosler and Berger, 80 gr Nosler and can't get them to group worth a ****. The only bullet that groups well is 55 gr Berger match. Any contributions will be greatly appreciated. The only reason I went to the 8 twist was to shoot the heavier bullets but I can't seem to do it.

  2. #2
    JCalhoun
    Guest
    Have you verified the twist rate?

  3. #3
    Team Savage stomp442's Avatar
    Join Date
    Nov 2010
    Location
    Safford, Az
    Age
    42
    Posts
    1,459
    The 80s would probably prefer a 7 twist to properly stabilize. Have you tried shooting them at 200 yards to see if they settle down?

  4. #4
    omega1
    Guest
    I have verified the twist rate, the 80gr bullets check out well according to Bergers twist rate calculator.I have not tried them at 200 because they did so bad at 100. I know that some bullets shoot better at 200 because of the stabilization factor but they don't group at .750 at 100.

  5. #5
    Team Savage wbm's Avatar
    Join Date
    Dec 2006
    Location
    New Mexico
    Age
    80
    Posts
    2,645
    Bullet that shot the best for me in .223 with that twist rate was the 70gr Berger.

  6. #6
    Team Savage stomp442's Avatar
    Join Date
    Nov 2010
    Location
    Safford, Az
    Age
    42
    Posts
    1,459
    Try them at 200 before you give up on them. Its worked for me in the past. I had a .308 that would shoot about a 2" group at 100 with the 168 Bergers but would group 3/4" at 200.

Similar Threads

  1. looking for a 165 gr 300 blk or 30-223 load
    By brstevens in forum Ammunition & Reloading
    Replies: 11
    Last Post: 06-26-2016, 05:07 PM
  2. .22-250 load
    By buggybuilder in forum Ammunition & Reloading
    Replies: 14
    Last Post: 07-03-2013, 01:30 AM
  3. 300 WSM Load Lead bullet load data?
    By snowgetter1 in forum Ammunition & Reloading
    Replies: 0
    Last Post: 12-14-2012, 03:41 PM
  4. Anyone load for the 308 x 1½ ?
    By Hammer in forum Ammunition & Reloading
    Replies: 8
    Last Post: 04-30-2011, 03:07 AM
  5. any one load for this ?
    By revolverfan2 in forum Ammunition & Reloading
    Replies: 1
    Last Post: 12-05-2009, 11:11 AM

Members who have read this thread in the last 1 days: 0

There are no members to list at the moment.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •