what scope mounts for a mark II ?

[oldbrass]

Bought a Mark II 22LR today, a left-hand bolt with accu-trigger..It has open sights but no scope mounts,What mounts are you all using..I`ve never had a .22 without them...but a lefty with accu-trigger I had to have it .

[J.Baker]

I like the GameReaper mounts from DNZ Products. Integral base and rings CNC machined from a solid billet of aluminum.

[tzvier]

I just ordered these for the RH version
http://www.amazon.com/gp/product/B00...?ie=UTF8&psc=1

Look around, they can be had for cheaper (I just prefer to deal with Amazon in case there is a problem)

[oldbrass]

I ordered the weaver #24 from amazon and installed on the rifle, they work great

[diesel]

+1 on the Weaver #24s

[tzvier]

Got mine yesterday, put them on and mounted the scope.... bolt wouldn't close. Screws come through about half a mm. Anyone else have a problem like this?

[charb52]

I second the DNZ mounts. I have them on all my rifles and won't use anything else now

[JCalhoun]

tz,

It's a common problem. You have a few options here. One, check to see if the screws are all the same length. If they are you can get some shorter screws from somebody like Brownell's or you can simply put them in a vise and grind/file them down a little bit and reinstall.

Make sure you use some oil on the threads and don't over tighten them.

[tzvier]

Glad it's not just me. Put them in a vice last night and ground them a bit with the dremel.

[Creed Bennett]

I noticed on the Weaver base guide that the footnotes say that you have to shorten the mounting screws for them to work correctly. I was looking for some mounts for my new MKII G.

[teebirdhyzer]

I use the weaver quadlocks and like them alot. Have them on about 8 or 9 riles and they work really well. Just don't overtighten the screw that holds them to the bases.