Reply With QuoteGlue/epoxy it in place??? Or, since you have the bottom metal just get a mill bit on a dremel tool and open the new stock up to accept the bottom metal and mag. Just take a little wood off at a time and test fit it.
So I just got a Boyd's for my 111 TH. The rifle is a DBM, so I need to convert it to a blind mag. I've got the floorplate off the magazine, so now I just need to know how to mount the body?
I don't have the L-clip, so I was wondering if anyone could give me some insight on how to do this without.
Last edited by Inebriated; 02-07-2013 at 05:49 PM.
Glue/epoxy it in place??? Or, since you have the bottom metal just get a mill bit on a dremel tool and open the new stock up to accept the bottom metal and mag. Just take a little wood off at a time and test fit it.
there used to be a note over at Stocky Stocks and perhaps SSS that gives you the correct part number for the little fastener you need to get to hold the mag to the stock. Boyds had it at one time as we but RRIC now you have to get the part from Savage
Members who have read this thread in the last 1 days: 0
Posting Permissions
Bookmarks