Did you remove the retaining pin that holds it in? If he had a primer blow it compressed the spring and got it too hot. Prolly just need a new spring
My buddy has a ejector pin stuck inthe bolt face and won't pop out. I took the whole bolt apart and used powder solvent and Kroil oil but it won't budge. I tapped it hard on a wood block and hit it with a hammer to no avail. It's stuck!!! Looking for a 7mag bolt face and ejector pin with spring. If you got one please let me know.
Did you remove the retaining pin that holds it in? If he had a primer blow it compressed the spring and got it too hot. Prolly just need a new spring
Yes sir I removed the pin and everything else from the bolt. Gave it all a good cleaning while we were at it.
Did you try to lightly push the pin inward and reapply some Kroil? Wear safety glasses
Bookmarks