BEDDING A SAVAGE ACTION

[aimatit]

I know there are probably old posts or threads about this - bedding a savage action 10,11.12.110,111,112, etc. Does anyone have a picture they could post, any brand will do. Thanks - Or cuss spit make rude lude comments, and then point me to a thread that would be tutorial.

[scottkr]

Go to the technical artical section of this web site and go to "Improving the Duramax Stock" artical. It has lots of good pictures and explanations. Have done this to Duramax stocks on a few occasions. It works just like it's written. Also, follow the "stock Bedding 101" article, same section. Bothh will be very helpful to you.

[aimatit]

Scottkr, Thanks for the info

[Uncle Jack]

He's not a paid member......can he access the tech articles?

uj

[axaviere]

try this... http://www.snipershide.com/forum/ubb...1063815&page=1

[slurpin dog]

Go to the technical artical section of this web site and go to "Improving the Duramax Stock" artical. It has lots of good pictures and explanations. Have done this to Duramax stocks on a few occasions. It works just like it's written. Also, follow the "stock Bedding 101" article, same section. Bothh will be very helpful to you.

When I search "Improving the Durmax Stock" all that comes up is you comments. Where is the technical artical section you referr to?

[torjy]

Here's the link -

http://www.savageshooters.com/index....the%20Duramaxx

It's reached from the Home Page through the Technical Articles link and you must be a paid member.

There's a wealth of good info here.

Good shooting

[tucker301]

try this... http://www.snipershide.com/forum/ubb...1063815&page=1

That's the best one I've seen.
A great guide. Worth bookmarking.

[axaviere]

there are two other bedding posts in the gunsmithing section that have tons of pictures as well.