Reply With QuoteLooks like the mag just hangs from a flush to stock magwell. Is this the case or is there some material supporting the mag? Looks good I just like a little support around the magazine.Originally Posted by sniperjhk
MAN those are some nice pics of a sweet gun. Ive been eyeing those dicks (they call em 11vt over by me) for awhile now. Just love the whole setup you have. Nice and simple but I'm sure is fun as hell to shoot. Did you paint the original stock or is that an aftermarket? I love the webbing paint, I done both mine with it.Savage 10T (Dick's special) cut/threaded to 18" with a Specwar762, HS Precision stock, SWFA SS 16x42. Sending 178 A-Max's to 1000 yards.
IMG_20150823_104105490_HDR by Chrazy-Chris, on Flickr
and a few other glamour shots...
IMG_20150628_083750571 by Chrazy-Chris, on Flickr
2015-08-26_10-22-08 by Chrazy-Chris, on Flickr
Looks like the mag just hangs from a flush to stock magwell. Is this the case or is there some material supporting the mag? Looks good I just like a little support around the magazine.
Me too. I think it gives the haters ammo for there hating.
Here's my new one.
12LRP 6.5CM SWFA 10x Dark Eagle Customs 10 round mag and extended mag release.
Getting gear together for yesterday's match. Did s scope upgrade.
This was a paper stage 5rds 30secs at 320.
I placed 5th out of 20 shooters. I need to get myself a Tripod and medium height shooting sticks for use in future matches when the gear is allowed.
I was thinking about trying out the Promos gen 2 trigger pod.
Stevens 200 action
McGowan 26" varmint #2 with brake
Timney 3lb
Savage model 12 stock with pillars dipped in ATACS
3 holing with IMR 4064 behind 55 gr Vmax's when I do my part.
Last edited by CRAMER; 09-22-2015 at 02:06 PM.
[IMG][/IMG][IMG]
[/IMG]
mdt hs3 fde magpul prs and magpul miad 1.5 grip burris mtac 4-14 scope burris extream rings witt brake stainless 338 mag , bolt handle on order.
hers is the fcp-sr 308, nikon scope 3-9 high mount rings , waiting on ok for can...
hope to be re barreling my 338 soon with a pac nor barrel. both are great shooters and i love the mdt chassis.
Looks Great!!!!!!!!!!!!!!!!!!!!!
I'll play. Savage Short Action with a Shilen Pre Fit 1:8 twist, threaded at 22" long. It sits in a Masterpiece Arms BA Chassis. Currently has a SWFA 20x up top. Atlas Bipod on the way to replace the home made one. Still factory trigger, but may upgrade later. I just started load development on Friday, but it looks like somewhere around 35.8 grains of Varget will put the 130 Hybrids into a ragged hole.
Very nice!!!!!!!!!!!!!!!!
Thanks DryBean. I'm thrilled with it so far. It's my first Bolt build. There is still quite a bit I would like to do to it, but in good time.
Based on bullet weight and load...260 Remington?I'll play. Savage Short Action with a Shilen Pre Fit 1:8 twist, threaded at 22" long. It sits in a Masterpiece Arms BA Chassis. Currently has a SWFA 20x up top. Atlas Bipod on the way to replace the home made one. Still factory trigger, but may upgrade later. I just started load development on Friday, but it looks like somewhere around 35.8 grains of Varget will put the 130 Hybrids into a ragged hole.
Close, 6.5x47. I forgot that part!
Great Job, very nice!!!!!!!!!!!!!!!
Thank You!
Double post sorry
Here's my custom 260
They who would give up essential Liberty, to purchase a little temporary Safety, deserve neither Liberty nor Safety.
And here are some teasers of the newest member of the collection, Sasha Fierce. She's currently getting trued up and timed at the smith, and waiting on a new tube to really reach out and touch stuff. She'll get a coat of Kryptek as well. Will get some proper pics once she's finished.
Last edited by WinnieTheBoom; 11-19-2015 at 03:47 PM.
[I]"In the end, run what 'ya brung because it's better than nothing and don't give two ****s what some interwebs chat board guy says about your rig."[/I]
nice rifles Winnie!!
Thank you good sir!
[I]"In the end, run what 'ya brung because it's better than nothing and don't give two ****s what some interwebs chat board guy says about your rig."[/I]
my latest is getting some top secret work done to it should be ready today and ill post a few pics when i get a chance.
[I]"In the end, run what 'ya brung because it's better than nothing and don't give two ****s what some interwebs chat board guy says about your rig."[/I]
well it didnt come out exactly as planed but its close enough this time as ill most likely re-barrel before the start of the next match season in march.
the plan was to have the barrel,action and bolt handle match the scope and the problem is the scope is anodized and it takes 3 colors to match...theres 3 other guys that have this color combo down and wouldnt give up the mix...my guy called vortex then cerakote and figured out the secret(or missing)ingredient is purple....the color now looked VERY close until it came out of the oven and it is very close its just missing the purple tint....next time will be exact.
now any of you shooting a JP tank break(or most breaks)know that the break from the inside of the front chamber to where the break threads onto the barrel is right at 1.250"...the barrels ive had threaded for a break end up with about 3/4s to 1" of thread...after adding a crush washer i end up with about .300 threaded into the break so that leaves almost an 1" from the crown to the inside of that first chamber so the carbon builds up around the crown of the muzzle in the extra threads and after about 4-500 rounds starts to effect accuracy so the break needs to be pulled and cleaned,
so while i had everything apart i had my smith mill the muzzle end of my break off to .300 so the crown would be flush to the first chamber and should eliminate the need to pull the break and clean...or thats my thoughts anyway LOL....
Members who have read this thread in the last 1 days: 0
Posting Permissions
Bookmarks