Reply With Quote- Reason
- Duplicate
Mike I retired from the US Army, and I agree with you. As an adult you are entitled to consume whatever beverage you choose. It is wrong to be denied this, but you and me alone wont solve this childish issue...its going to have to come from some top brass. What I would like to know is where you got that great big picatinny rail from? I would like to see more of their products.
Thanks for any info you can provide.
thanks for your service.
503rd Abn Bn, Ft. Bragg, NC, Airborne, AirAssaut, Sapper, Retired 1997
Guest
"This rifle is mine...there are many like it but this one is mine"..... I know this isn't earth shattering but I sure do like it so far. Just got it together and will take it to the range this week. Stevens short action, Criterion 26" varmit contour in .308 Winchester, Rifle Basix Sav1 trigger, NSS barrel nut and recoil lug, B & C Medalist Tactical stock, Bushnell, Tactical Elite 10x40. I still want another bolt handle and will have it Duracoated once I make certain that all is well.
Here is the wife's and my Savage Rifles, the Lefties are hers.
Got a new hard case for my 110FCP :) Custom cut foam...got it right the first time haha
6.5x55 mcgowen barrel, choate stock, bushnell elite tactical scope.
Predator .243, RWS brake, MCS-T stock, Vortex 6-24x50, Seekins rings, Weaver base, Harris bipod, Eagle pack, RatMag Magazine.
DK
[B]Savage - Arken Optics - MDT - Seekins - MOΛΩN ΛΑΒΕ[/B]
Here's my newly assembled 300 BLK
Accu-trigger action
McGowen barrel 16"
B&C medalist stock modified a bit
Duracoated with woodland tan and OD green
So far it really likes the 208 AMax loaded with A1680, but I'm just getting started.
What's up here? You have 6 rifles and Momma only has 2?Originally Posted by Uncle H
Here is the wife's and my Savage Rifles, the Lefties are hers.
Mine is not all that impressive, but it is my first Savage.
Savage 111FNS .30-06 with EGW 20MOA base, Burris XTR 30mm rings, and Bushnell Elite 6500 2.5-16X42 with the DOA600 reticle.
The next item is a Boyd's Classic laminate stock.
Last edited by tcecil88; 02-24-2013 at 12:43 PM.
Nice pic actually, I like the composition. As to the rifle, nothing wrong with it either. What shell holder is that you're using?
I believe it is a Mil-Tech. I don't really like it. The front strap is in the way of my cheek weld. I have one of the strap on stock pouches for another rifle that is better.
Gotcha, thanks for the info. It looks nice, not bulky and loose like a lot of the others I've seen.
It is a well made shell holder for as inexpensive as it is. Seems to be good quality elastic that won't stretch out quickly, and the shell holder itself is double thick heavy nylon. I like the stock packs better, but if this is the style you like, it should serve you well.
I like the mods you made to your B&C. If I had seen that sooner, I might not have been compelled to buy a Manners. Was there a lot of clean up?
Here's my newly assembled 300 BLK
Accu-trigger action
McGowen barrel 16"
B&C medalist stock modified a bit
Duracoated with woodland tan and OD green
So far it really likes the 208 AMax loaded with A1680, but I'm just getting started.
110 in .308
hey guys heres a pic of my savage, I figured there might not be many Canadians on this forum so I should represent
savage 12 F/TR .223
Minox 6-30X56 scope
Mystic Precision M-Pod , bipod
shoots really well for a factory barrel, but I still think I can do better, im tuning my load still
Nice, aheppner!
Savage MKII F using a Barrett M99.
_MG_5605 by defconskylude, on Flickr
_MG_5606 by defconskylude, on Flickr
_MG_5600 by defconskylude, on Flickr
_MG_5603 by defconskylude, on Flickr
_MG_5598 by defconskylude, on Flickr
Savage MKII F using Sig Sauer Blaser Tactical 2
_MG_3485 by defconskylude, on Flickr
_MG_3486 by defconskylude, on Flickr
_MG_3491 by defconskylude, on Flickr
Savage MKII F using AICS
_MG_4584 by defconskylude, on Flickr
_MG_4581 by defconskylude, on Flickr
_MG_4579 by defconskylude, on Flickr
_MG_4583 by defconskylude, on Flickr
Group pic of my other .22LR full metal conversions.
_MG_5588 by defconskylude, on Flickr
Last edited by defcon; 03-16-2013 at 12:12 AM.
Savage 10FP .308
Mcrees Precision Chassis
EGW HD 20MOA Base
Burris XTR Low Rings
Vortex Viper PST 6-24x50 FFP
Harris 6-9" Bipod
say boss i got that scope for my sav12 bvss 308
dam man you are to tough i cant take it... they are the best looking pieces i have seen
looks like the rustoleum texture good stuff i used it too then sprayed a light coat of black
FP 308
BA 10 308
111 LRH 338 Lapua
My new savage 10 FCP HS 308 5R, DNZ Tactical 1 piece mount, Millet 4x16 mil-mil scope, Harris BRS, waiting on Dark Eagle 10rnd mag and my stamp for the Silencer tech Supressor.
Latest build using a Savage MKII F. Range time in 2 weeks for test fire.
Paid $70 for the used stock. Bolts on like the AICS WELLS G96 stock.
Was able to slide the action/barrel through the bolt metal housing
_MG_5653 by defconskylude, on Flickr
_MG_5652 by defconskylude, on Flickr
_MG_5649 by defconskylude, on Flickr
_MG_5647 by defconskylude, on Flickr
_MG_5648 by defconskylude, on Flickr
_MG_5650 by defconskylude, on Flickr
_MG_5656 by defconskylude, on Flickr
Last edited by defcon; 03-26-2013 at 05:30 PM.
Members who have read this thread in the last 1 days: 0
Posting Permissions
Bookmarks