Reply With Quotecan't answer your ?? do you have one? I've been thinking about one.
What type of epoxy filler is good for finishing a moneysaver stock?
Is plain spray-on primer good for a base coat?
Stevens 200, .260/ Sin Arms Brux #7, 24"/ Stockade Woodchuck/ Rifle Basix SAV1/ Nikon Buckmaster 4x-14x-40mm
can't answer your ?? do you have one? I've been thinking about one.
Got one on the way.
Stevens 200, .260/ Sin Arms Brux #7, 24"/ Stockade Woodchuck/ Rifle Basix SAV1/ Nikon Buckmaster 4x-14x-40mm
Nitro stan is a good filler for pin holes, scratches and the like. Bondo thinned with a little solvent works well for larger areas, seam mismatch etc. I wanted my 2 to last so I used Duracoat primer and finish products.
Ed Bell, PA Deer Hunter & NRA Life Member ~ “The right of the citizens to bear arms in defense of themselves and the State shall not be questioned.”~
I used bondo and a plastikote stone fleck paint straight on to the scuffed stock.
"Muzzle velocity is a depreciating asset, not unlike a new car, but BC, like diamonds, is forever."-German A. Salazar
This is a perfect Thread for what I did with my Stockade stock with pictures.
http://forum.gon.com/showthread.php?t=366263&highlight=
http://forum.gon.com/showthread.php?t=374570&highlight=
joseph
Posting Permissions
Bookmarks