EAW,
As for a torque wrench the main choice that you will have to make is how much do you want to spend and how accurate do you want it to be. I use the wheeler fat wrench; but if you want to have one that is going to be the most accurate you may want to look into getting one from a company like Snap-On or MAC, they are able to be calibrated and you will be able to get the exact torque you want.
As far as part two of your post here is a thread that talks about torqueing the action screws. http://www.savageshooters.com/showth...n+screw+torque I would not lock-tite the bolts as they should not loosen up if you tighten them to the correct torque.
Bookmarks