Did you get the dvd with it,it sounds like it is not adjuted right.I would call rifle basix and pose the question right to him.He is a nice guy and very helpful.
I've just installed a SAV-1 Rifle Basix on my 110ba in 338. Everything seems tuned perfectly.......until I re assemble it. The safety works just fine until I put the chassis on. With the bolt up I can get the safety on. When I close the bolt the safety slides forward, even if I put some resistance on it.
Words of wisdom, thoughts & ideas please.
Thanks
Bush
Did you get the dvd with it,it sounds like it is not adjuted right.I would call rifle basix and pose the question right to him.He is a nice guy and very helpful.
Willing to give back for what the sport has done for me!
If I understand what's happening it will.
If the safety is in the full rearward position (Safe On - Bolt Locked) it will automatically move it to the middle "Safe on - Bolt Unlocked" position when the bolt is rotated closed and locked. If you look at the bolt handle on the underside where it fits over the bolt body you see a half round cut. When the bolt is closed it cams the safety bar forward to the middle position.
Bill
I just can't seem to figure it out. Works great until I put the chassis back on. I'm trying to figure out of somehow the chassis is putting pressure on the trigger,safety or bolt release.
Bush, are you calling the stock a chassis? If trigger is working O.K. out of stock, check to see if something is binding when in stock. Double check everything. Was trigger bracket removed to install ? If so check tab on rear is not below receiver, it fits between button & receiver.
Figured it out. The safety screw was making contact with the rear of the inside of the trigger guard area. Dremel solved by removing a bit if material.
Phewww..I am glad you got that fixed..A gun with a bad saftey is an accident waiting to happen..
What is the bedding compound on? is that the reciever or what.
Willing to give back for what the sport has done for me!
Bookmarks