Results 1 to 7 of 7

Thread: Good results with a new Model 10 FCP .308 at the range today

  1. #1
    Basic Member Joe L's Avatar
    Join Date
    Nov 2012
    Location
    West Texas
    Posts
    214

    Good results with a new Model 10 FCP .308 at the range today


    I bought a NIB Savage Model 10 FCP in .308Win on Saturday, found a 20 moa Burris sigle piece picatinny rail mount at Academy last night, mounted a Nikon M-223 2-8x scope from my AR and a Harris bipod from the same AR on the rifle and took it to the range. The Nikon scope is sized for an AR and has a 20 moa slant built in to it, so I dialed the scope down 20 moa from where it was on the AR and fired a round at 25 yards. 2" left and 1" down, not bad, so I made the corrections and went to 100 yards for the second round. This one was 1" high and 3" left so I made those corrections and then shot 4 rounds in a 1-3/8" group. Next, I changed from the Vortex 168 ammo to Rem 168 MK BTHP and shot the first round a little high, went down 1 moa and fired off the next 4 rounds in this group, about 1-1/4" center-center:



    I think if I had used a gridded target instead of the plain 3x4 card I could have shot a sub-moa group in the first 10 rounds with this new rifle, even with the wrong scope mounted about 1/2" too high. I stopped for the day, went home, ran some patches through the bore and declared victory, for now. Next are the right scope rings and a 5-20x scope dedicated to this rifle. Then 300-550 yard paper. I'm learning. I'm very happy with my choice of the Savage rifle.

    Joe

  2. #2
    Westcliffe01
    Guest
    Joe, I use the free Targetz PDF's which you can download and print yourself. Link here: http://www.targetz.com/targetzlib/10058.pdf That is the main one I use, but if you go to their base site http://www.targetz.com they have a gazillion different targets one can download free. The 10058 target has 4 heavy lines to help with scope centering and the 1MOA dot as the aiming point.

  3. #3
    New Member
    Join Date
    Jan 2010
    Location
    Frelsburg Tx
    Posts
    222
    Nicely done!!! Welcome to the addiction.

  4. #4
    Team Savage
    Join Date
    Feb 2010
    Location
    Kennedy Meadows,CA.
    Age
    73
    Posts
    4,788
    way to go ,it will only get better

    drybean

  5. #5
    Opus Dei
    Guest
    Hey, Joe! You made it over from SF.

  6. #6
    Basic Member Joe L's Avatar
    Join Date
    Nov 2012
    Location
    West Texas
    Posts
    214
    Quote Originally Posted by Opus Dei View Post
    Hey, Joe! You made it over from SF.
    Yup, I take good advice when offered!

    Joe

  7. #7
    Basic Member Joe L's Avatar
    Join Date
    Nov 2012
    Location
    West Texas
    Posts
    214
    Got some scope rings with the correct elevation for my little Nikon M-223 scope and shot it last night prone. I'm still not comfortable behind the bolt gun compared to an AR but I'm getting there. Several more 1" groups with the deviations being me, not the gun. Time for a good scope and more ammo.
    Joe

Similar Threads

  1. I think I got a really good deal today...
    By travistodd1 in forum Ammunition & Reloading
    Replies: 4
    Last Post: 11-23-2016, 12:24 AM
  2. Just tried CCI standard velocity. I think the results are good
    By Jack1 in forum Ammunition & Reloading
    Replies: 12
    Last Post: 08-15-2014, 06:20 PM
  3. 300 win mag tests today--when a good grouping isn't good.
    By thermaler in forum Ammunition & Reloading
    Replies: 8
    Last Post: 01-18-2014, 09:45 AM
  4. Good results today with stock 10 FCP-K at 545 yards
    By Joe L in forum 110-Series Rifles
    Replies: 9
    Last Post: 06-25-2013, 10:29 AM
  5. Range results after a T&T job.
    By psharon97 in forum 110-Series Rifles
    Replies: 10
    Last Post: 05-02-2012, 12:25 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •