Results 1 to 4 of 4

Thread: Accutrigger Adjustment on New Style 111...HELP! Please!

  1. #1
    brangus1111
    Guest

    Accutrigger Adjustment on New Style 111...HELP! Please!


    Hey everyone, Im a brand new here so i'll try to make this as clear as I can without pics. I just bought a new Savage model 111 FCNS 30-06. I sat down to try and adjust the accutrigger (with the help of the manual) and ran into some trouble. When I was attempting to remove the assembly from the stock, I couldn't get to the screw in front of the trigger guard. It's covered by the bolt release button and cannot figure out how to get it and didn't want to continue without asking someone who knew more than I. Has anyone had this same problem with the new models? Please help,...thanks!

  2. #2
    Basic Member
    Join Date
    Sep 2010
    Location
    Shepherd,Mt.
    Posts
    35
    The button can only be pushed in after releasing the trigger (fired position).

  3. #3
    Basic Member
    Join Date
    Aug 2010
    Posts
    434
    yea, dry fire it, then remove the bolt. You should now be able to depress the buttom and have room to get to it.

  4. #4
    1ShotKing
    Guest
    You don't have to dry fire if you don't want to, although it doesn't hurt anything. You can hold the trigger back and lower to bolt at the same time and it will close without being cocked allowing you to depress the bolt release.

    1ShotKing

Similar Threads

  1. Accutrigger adjustment
    By amboy49 in forum 110-Series Rifles
    Replies: 1
    Last Post: 04-25-2018, 09:26 AM
  2. Accutrigger adjustment
    By durango in forum 110-Series Rifles
    Replies: 17
    Last Post: 05-08-2013, 03:19 PM
  3. Accutrigger Adjustment
    By DavidL61 in forum 110-Series Rifles
    Replies: 7
    Last Post: 07-27-2012, 02:49 PM
  4. Accutrigger adjustment
    By bobcat30 in forum 110-Series Rifles
    Replies: 7
    Last Post: 08-21-2010, 12:26 AM
  5. ACCUTRIGGER ADJUSTMENT
    By joeb33050 in forum 110-Series Rifles
    Replies: 9
    Last Post: 10-24-2009, 07:20 AM

Members who have read this thread in the last 1 days: 0

There are no members to list at the moment.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •