stock for stevens 200?

[acemisser]

Whats and who has them..Replacement stocks for stevens 200...I would
like something that the barrel channel can be cut out for a heavy barrel..

does anyone know if the stevens 200 action is the same as the mod 10 as
far as stock fit..

[M.O.A.]

action is the same and boyds and stockys are two great places to find stocks and there stagger feed ;-}

[acemisser]

appreciate it man

[Werewolf]

Not all stevens are stagger feed! Newer ones may be centerfeed, make sure of what you have before you order. That being said they are otherwise the same as a regular savage.

[1ShotKing]

Not all stevens are stagger feed! Newer ones may be centerfeed, make sure of what you have before you order. That being said they are otherwise the same as a regular savage.

X2. I have a Stevens that is center feed. The best way to determine what you have if you are unsure is to remove the action from the stock. If your magazine stays in the stock, you have a center feed. If the magazine stays attached to the action you have a stagger feed.

1ShotKing

[semtav]

Whats and who has them..Replacement stocks for stevens 200...I would
like something that the barrel channel can be cut out for a heavy barrel..

does anyone know if the stevens 200 action is the same as the mod 10 as
far as stock fit..

I just got a Boyd's stock for my Stevens 200 ( long action stagger feed ) fits real nice, but---- they have a finger groove at the front which pretty much precludes using it for a larger barrel. I plan on installing a varmint barrel on it, so hopefully someone makes them with more meat at the fore end

[acemisser]

my rifle has the 4 1/4 in hole spacing and it has a bull barrel as well....No sure if I would want a thunb
hole model or not.Never tried one of them before....Any more ideas..And it is stagger feed as the clip comes out with the
action...

[semtav]

Don't have any experience with them, but you might look at Richards Microfit Gunstocks.
I might give them a try for my next project

[keeki]

duramaxx