Results 1 to 2 of 2

Thread: Striker ejector and spring

  1. #1
    capttravis
    Guest

    Striker ejector and spring


    Can anyone tell me if the ejector spring and ejector plunger are the same on all strikers ? Are they the same on .308 bolt heat as the .223 bolt head ? I recently bought a new bolt for my striker so I can rebarrel it to .221 fireball, it was a .243 origionaly. Savage sent me a new bolt but it was missing the ejector and the spring and retaining spring. When trying to install it, I found it will not go in far enough. With the spring left out it will go in to the correct depth. Either the hole is not drilled deep enough from Savage or there is a difference in these parts and they sent me the wrong ones. Any help would be great. Thanks

  2. #2
    JCalhoun
    Guest
    I think you should call Savage and find out for sure.

Similar Threads

  1. Need Ejector Spring
    By Appleseed in forum 110-Series Rifles
    Replies: 7
    Last Post: 11-07-2017, 06:27 AM
  2. Ejector Spring
    By Iowa Fox in forum 110-Series Rifles
    Replies: 3
    Last Post: 02-20-2016, 09:01 AM
  3. Blown Ejector Spring
    By CharlieNC in forum 110-Series Rifles
    Replies: 9
    Last Post: 03-25-2013, 04:13 PM
  4. Ejector pin & spring
    By fgw_in_fla in forum Axis Series Rifles
    Replies: 15
    Last Post: 08-27-2012, 10:37 PM
  5. Savage Ejector Spring
    By xsmbuc in forum 110-Series Rifles
    Replies: 1
    Last Post: 02-15-2011, 07:54 AM

Members who have read this thread in the last 1 days: 0

There are no members to list at the moment.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •