Yea ya just need tweak the feed lips in some. Try to see which end comes up first, front or back and start there. Let me also ask, did it feed properly in the original caliber, and what caliber was it?
If an '06 or similar, you MIGHT need the magnum box and follower. I got one for mine, but was never really satisfied with it, and got the original to feed better than the magnum one. The rim just needs to stick up high enough for the bolt to catch it, no higher. Usually the front lifts up too soon and causes the brass to launch. Try tweaking the front lips a bit. Go little bits at a time. It's tough cause they are strong and springy.
Good luck.
Bookmarks