Results 1 to 5 of 5

Thread: EGW BASE'S

  1. #1
    ikevanbrauer
    Guest

    EGW BASE'S


    What's the difference in a picatinny round back or flat back scope base. Does one look better than the other or function better. I am building a 12fvss 22-250 vortex crossfire 6-24x50 scope and burris signature zee rings. If anybody has similar setup did you go with low or medium rings
    thanks for any input.

  2. #2
    Team Savage pdog06's Avatar
    Join Date
    Mar 2007
    Location
    Kirkwood, PA
    Age
    52
    Posts
    2,230

    Re: EGW BASE'S

    The "round" or "flat" back is referring to the type of action you have. The older Savages were flat where the rear of the scope base mounts, whereas the newer ones are round just like the front. So you just need to look on your action where the rear scope base sits. If its round you need the round back base, and if it is flat you need the flat back base.

    For thats scope/base combo you will need medium height Burris rings.
    ”I have a very strict gun control policy: if there’s a gun around, I want to be in control of it.”
    ~Clint Eastwood

  3. #3
    ikevanbrauer
    Guest

    Re: EGW BASE'S

    thanks for the info pdog i just bought the gun new so im sure its round then. UPS still has gun so when i get it I check and get part's comin.

  4. #4
    New Member
    Join Date
    Oct 2007
    Location
    Philadelphia Pa
    Age
    78
    Posts
    1,185

    Re: EGW BASE'S

    When i need something from EGW i take a road trip to their office and store which is only about an hour drive from me in Quakertown Pa.

  5. #5
    Team Savage GaCop's Avatar
    Join Date
    Mar 2007
    Location
    Warner Robins, Ga
    Age
    77
    Posts
    5,024

    Re: EGW BASE'S

    I use the EGW on all my builds, good value for the money.
    Vietnam Vet, Jun 66 - Dec 67

Similar Threads

  1. 1 pc base
    By rs in forum Axis Series Rifles
    Replies: 10
    Last Post: 07-13-2015, 06:14 PM
  2. Base
    By budmccarroll in forum Optics
    Replies: 3
    Last Post: 02-21-2015, 01:27 PM
  3. Replies: 16
    Last Post: 11-20-2012, 08:40 AM
  4. Do i need a moa base
    By fabricator21 in forum Optics
    Replies: 4
    Last Post: 07-31-2011, 09:40 AM
  5. EGW standard base vs the HD base
    By efm77 in forum Optics
    Replies: 37
    Last Post: 06-04-2011, 04:18 PM

Members who have read this thread in the last 1 days: 0

There are no members to list at the moment.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •