Results 1 to 3 of 3

Thread: Acuu Trigger Adjustment screw size HELP

  1. #1
    Basic Member
    Join Date
    Dec 2006
    Posts
    18

    Acuu Trigger Adjustment screw size HELP


    I was wondering why my savage sear would engage the accu trigger when i closed the bolt and it turns out to be the adjustment screw for the accu trigger is mission. So there is little to no pressure on the trigger. Can i pickup a screw from the hardware store that will fit in place of the accu trigger adjustment screw and if so what size is it? Something like a socket head plug or do i need the original screw.

  2. #2
    Basic Member
    Join Date
    Dec 2006
    Posts
    18
    Issue Resolved.

    As i looked for information on this i found instructions showing a screw but it is not a screw. It's the spring that actually screws in and out to adjust the trigger. Thanks

  3. #3
    thomae
    Guest
    If you could post an annotated photo or drawing, it would help forum members find you the missing part.

Similar Threads

  1. Article: Factory 3-Screw Trigger Adjustment Procedures
    By Admin in forum Article Discussions
    Replies: 18
    Last Post: 06-26-2023, 03:25 PM
  2. Trigger Pull Adjustment Screw Missing
    By WGSNewnan in forum 110-Series Rifles
    Replies: 7
    Last Post: 10-27-2013, 02:57 PM
  3. Trigger Adjust? (No sear adjustment screw)
    By snowshoes in forum 110-Series Rifles
    Replies: 8
    Last Post: 03-02-2013, 11:35 PM
  4. Accutrigger adjustment screw?
    By jinx-) in forum 110-Series Rifles
    Replies: 17
    Last Post: 07-16-2011, 10:53 PM
  5. Trigger adjustment screw (something new for me)
    By GUNFANATIC in forum 110-Series Rifles
    Replies: 11
    Last Post: 06-17-2010, 09:36 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •