Hello all,
I work at a small gun store/outdoor store and we sell Savage. We have had issues with customers purchasing Axis in 22-250 and the bolt not fully closing on a round therefore they can not use it. So instead of having this to deal with, (upset customers) we figured if we had a piece of fired brass we could slide it into the chamber and make sure the bolt will close before it leaves the store. We tried this with two of the new Axis and both pieces of brass are in the chamber, but the bolt is stuck forward and it won't come back. One will close on the brass, the other will not. The issue now is how do we get the piece of brass out of the chamber? Is there something I am missing here? I have a Stevens 200 and I have put an old piece of brass into the rifle to practice dry firing and never had this happen. Any help would be greatly appreciated. I am working this weekend and would like to get it resolved then. Thanks a ton,

1ShotKing