Results 1 to 20 of 20

Thread: Axis Issues, need some help!

  1. #1
    1ShotKing
    Guest

    Axis Issues, need some help!


    Hello all,
    I work at a small gun store/outdoor store and we sell Savage. We have had issues with customers purchasing Axis in 22-250 and the bolt not fully closing on a round therefore they can not use it. So instead of having this to deal with, (upset customers) we figured if we had a piece of fired brass we could slide it into the chamber and make sure the bolt will close before it leaves the store. We tried this with two of the new Axis and both pieces of brass are in the chamber, but the bolt is stuck forward and it won't come back. One will close on the brass, the other will not. The issue now is how do we get the piece of brass out of the chamber? Is there something I am missing here? I have a Stevens 200 and I have put an old piece of brass into the rifle to practice dry firing and never had this happen. Any help would be greatly appreciated. I am working this weekend and would like to get it resolved then. Thanks a ton,

    1ShotKing

  2. #2
    Basic Member fla9-40's Avatar
    Join Date
    Aug 2012
    Location
    Between Lost and Found
    Posts
    371
    Was the brass shot from these rifles, or was the brass FL sized BEFORE you tried them in these rifles?

    If not that is why it is stuck, it was fire formed from another rifle.

    See if you can get a cleaning rod to assist you to get them out

  3. #3
    1ShotKing
    Guest
    Unfortunately, it was fired from a different rifle. That is something I knew just somehow managed to overlooked it completely. So that is the reason why it is stuck. How do I get it un-stuck?

    1ShotKing

  4. #4
    Basic Member fla9-40's Avatar
    Join Date
    Aug 2012
    Location
    Between Lost and Found
    Posts
    371
    If the bolt will rise, I would run a cleaning rod from the muzzle end and GENTLY hammer on the rod

    If the bolt will not rise, you will have to dissemble it to remove it

    Anyone else have a better suggestion?
    Last edited by fla9-40; 10-11-2012 at 08:55 PM.

  5. #5
    1ShotKing
    Guest
    The bolt will rise on both. I will try the cleaning rod suggestion, how hard should I go before trying something else? If there are any other suggestions I'm all ears. Thanks again,

    1ShotKing

  6. #6
    Basic Member fla9-40's Avatar
    Join Date
    Aug 2012
    Location
    Between Lost and Found
    Posts
    371
    Quote Originally Posted by 1ShotKing View Post
    The bolt will rise on both. I will try the cleaning rod suggestion, how hard should I go before trying something else? If there are any other suggestions I'm all ears. Thanks again,

    1ShotKing
    Hard to judge that not being there... I would not fram it like you were driving a 10d nail in pure fat lighter! You might want to spray some Rem oil or such in the chamber and pull the mag and spray some in there on the bolt to help out some.

  7. #7
    Basic Member
    Join Date
    Sep 2011
    Location
    Right where I Always Need To Be. Usually...
    Posts
    2,507
    Wood dowel works good, too. The case is stuck & the barrel is hardened steel. using a brass or aluminum rod won't hurt it.

    Slide it in there & give it a good smack. It'll come out.

    Don't forget the traditional swear words..... You may have to make up a new or two.
    'Scuse me while I whip this out...!

  8. #8
    M.O.A.
    Guest
    Frank you for got somethink there.

    That was fgw in Fla LOL ;-)

  9. #9
    Basic Member fla9-40's Avatar
    Join Date
    Aug 2012
    Location
    Between Lost and Found
    Posts
    371
    How did it work out 1ShotKing, did you get the brass out??

  10. #10
    1ShotKing
    Guest
    Didn't try it yet, I've been in school all day. I'll be at work tomorrow morning bright and early I'll let you know how it goes. Thanks again for your help.

    1ShotKing

  11. #11
    1ShotKing
    Guest
    Got both of them out. One took a little more persuasion but nothing serious.

    1ShotKing

  12. #12
    lockwoodjohn
    Guest
    I had the same problem with my new Edge in .223, I have another savage in .223, A model 10, So before I got the Edge I went and reloaded 500 hundred rounds
    with 55 grain Hornady V - Max, The only problem was I only neck sized the Winchester Brass from the Model 10, I had sold it to a friend because he wanted it for
    the heavy target barrel it had on it. I wanted the lighter barreled gun, Easier to carry through the fields after wood chucks. When I went to sight in the Edge with
    the rounds fire formed to the Model 10 my bolt would not work either. It had me stumped for a while until I went back through my reloading notes and remembered
    I did not full length resize the cases, No way would they work in the Edge, Took apart 500 rounds, Full length resized the cases, reloaded them and now they work
    fine. Take Care, Everyone and shoot straight..... Lockwoodjohn

  13. #13
    thomae
    Guest
    Quote Originally Posted by lockwoodjohn View Post
    So before I got the Edge I went and reloaded 500 hundred rounds...
    Wow! My math makes that out to be 50,000 rounds. LWJohn, you win the prize for being one dedicated reloader. ...and confident, too!

  14. #14
    Basic Member fla9-40's Avatar
    Join Date
    Aug 2012
    Location
    Between Lost and Found
    Posts
    371
    Quote Originally Posted by 1ShotKing View Post
    Got both of them out. One took a little more persuasion but nothing serious.

    1ShotKing

    Glad it worked out for ya! You can FL re-size them and all will be well.

  15. #15
    Team Savage
    Join Date
    Feb 2010
    Location
    Kennedy Meadows,CA.
    Age
    73
    Posts
    4,789
    i am sure i am missing something
    & my math is not great,but were do you get 50,000 rds

    drybean

  16. #16
    Basic Member fla9-40's Avatar
    Join Date
    Aug 2012
    Location
    Between Lost and Found
    Posts
    371
    I think it was from lockwoodjohn wrote
    reloaded 500 hundred rounds
    Which is 500 x hundred

  17. #17
    thomae
    Guest
    Quote Originally Posted by fla9-40 View Post
    I think it was from lockwoodjohn wrote
    Which is 500 x hundred
    +1
    Sorry for the confusion, was simply having a gentle chuckle at Lockwood John's typo.

  18. #18
    Basic Member fla9-40's Avatar
    Join Date
    Aug 2012
    Location
    Between Lost and Found
    Posts
    371
    Quote Originally Posted by thomae View Post
    +1
    Sorry for the confusion, was simply having a gentle chuckle at Lockwood John's typo.
    "confusion".....what confusion??? Do I look confused?

    If you can't have fun, might as well pull the dirt in around ya!

  19. #19
    lockwoodjohn
    Guest
    drybean you are right on to question the math,

    First time 500 rounds, All new cases, bullets,powder and primers.Shot them all through the model 10, Them reloaded them (neck sized only) Tried to shoot them
    through Edge, No go! Took 495 bullets apart along with the 5 I did manage to shoot through the Edge and F/L re-sized them and reloaded them. Now they shoot
    through the Edge fine.
    lockwoodjohn ( by my math that is 1500 bullets but only using the 500 original cases, The Gentlemen might be using that new Math they teach in places of higher learning like at Cornell U. )

  20. #20
    lockwoodjohn
    Guest
    Sorry for the typo I did not even catch it after reading it 3, That is one , two, three times It Was ONLY 500 X 3 different times.

    LOL lockwoodjohn

Similar Threads

  1. First rounds at the range with new Axis XP, some issues
    By LarryM in forum Axis Series Rifles
    Replies: 9
    Last Post: 11-16-2017, 02:31 AM
  2. Savage Axis II accuracy issues
    By groundhogsniper in forum Axis Series Rifles
    Replies: 8
    Last Post: 04-26-2017, 01:39 AM
  3. Savis Axis 30-06 Issues
    By Zig25 in forum Axis Series Rifles
    Replies: 3
    Last Post: 12-18-2016, 10:54 AM
  4. Issues dialing in scope on Axis II
    By Exospeed in forum Axis Series Rifles
    Replies: 13
    Last Post: 04-17-2015, 03:10 PM
  5. Axis 308.. Accurracy issues...HELP
    By NDAR15MAN in forum Axis Series Rifles
    Replies: 15
    Last Post: 02-19-2015, 08:42 PM

Members who have read this thread in the last 1 days: 0

There are no members to list at the moment.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •