Results 1 to 3 of 3

Thread: Convert Stevens 200 223 cal to 7mm-08

  1. #1
    Basic Member
    Join Date
    Jan 2009
    Posts
    102

    Convert Stevens 200 223 cal to 7mm-08


    Okay guys I did some searching, lots of searching and I'm a little confused. I have a Stevens 200 223 cal and would like to switch to 7mm-08. I know you have to change bolt head, baffle, and magazine. My question is abut the firing pin. Does it use the same firing pin? Or do I have to swap it out?

  2. #2
    Basic Member
    Join Date
    Sep 2012
    Location
    Elizabethtown,Pa
    Age
    75
    Posts
    1,313
    Same firing pin assembly. If your swapping the bolt head parts you'll need an extractor for the larger rim, the 223's is longer from the detent( where the ball fits) to the outside.

    Bill

  3. #3
    Basic Member
    Join Date
    Jan 2009
    Posts
    102
    Bill,

    Thanks for the answer on firing pin. I have converted another short action to 7 SAUM, so I have the complete head bolt,and magazine to change over the 223 cal. I have a 7mm-08 20" factory carbine barrel that I will swap back and forth.

Similar Threads

  1. Stevens 200 convert 270 to 7 wsm
    By 87predator in forum 110-Series Rifles
    Replies: 2
    Last Post: 01-20-2015, 04:58 PM
  2. Is it possible / feasible to convert Stevens 200 .243 to .17 Rem.?
    By Yankee Bill in forum 110-Series Rifles
    Replies: 2
    Last Post: 01-05-2014, 08:05 PM
  3. Replies: 2
    Last Post: 01-11-2012, 01:47 AM
  4. Replies: 0
    Last Post: 02-26-2011, 06:22 PM
  5. Help Convert Savage Stock To Stevens
    By scottkr in forum 110-Series Rifles
    Replies: 2
    Last Post: 11-09-2010, 08:58 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •