Hand tight.
Hi all,
I was just wondering what the recommended action screw torque would be for a Model 11, syn stock?
Thanks
Hand tight.
"As long as there's lead in the air....there's still hope.."
"Hand Tight"
That will vary a bit depending upon whether you are a 124lb Asian or a 240lb Irishman.
IF IT MAKES YOUR BOLT HARD TO OPEN YOUR SCREWS ARE TOO LONG
I've always used 25lbs which is "hand tight" in a bedded stock.
I have always been told to tighten the front screw a little tighter than the rear screw (closest to the trigger).
[B][SIZE=3]Dennis[/SIZE][/B]
Thanks guys,
Its appears the industry 'standard' is anywhere from 25-65. In their pillar bedded stocks Kimber recommends 45 front and 35 rear.
Bookmarks