Article: Savage Action Screw Lengths

[sharpshooter]

You can view the page at http://www.savageshooters.com/conten...-Screw-Lengths

[CH Luke]

Torque?

[65Whelen]

ditto, Torque recommendation?

[Rdoronila]

How many action screws do I need for the 18637 action (dual port, single shot, 3.4 spacing)?

[oley55]

For my 2017, Model 10 FCP-SR, AccuStock the front screw from the factory was about 5/8" (.625) and barely captured 1.5 threads. Being fearful of it striping out, I cut down a longer (Non-Savage) screw I had on hand. It is now 0.75" and could be slightly longer, but the bolt head would definitely hang up on a 1.1" screw.