Results 1 to 14 of 14

Thread: FCP 110 300 win mag load

  1. #1
    jjdgldaz
    Guest

    FCP 110 300 win mag load


    Guys new into reloading and searching for a good load for a 300 win mag. so far struck out best factory ammo i have shoot has been federal hunting ammo. 178 grain with lead tip gave 1moa. my fp10 in 308 does sub moa with nosler custom. any ideas.

  2. #2
    Deerhunter 28
    Guest
    IMR 4350 165 Spitzer ?


    PSE EVO 57 Lbs.
    Blacked out

  3. #3
    Basic Member
    Join Date
    Mar 2007
    Age
    61
    Posts
    156
    H-4831-72.0 grains, Sierra 180btsp, Fed or win mag. rifle primer,2950fps deadly. Shoots 1/2 or less for 3 shot groups, every tuned .300 win mag I have shot it in, about 12 of them, 1/2 with sporter barrels. MY buddy took a nice 6x6 in Wyoming a few years ago with it, 450 yds, put 2 in the shoulder abou 4 inhes apart. A lot of deer, bear and boars have fell to this load in folks I built the guns for.

  4. #4
    Basic Member
    Join Date
    Oct 2007
    Location
    Northern Colorado
    Posts
    109
    I have had good results with sierra bullets and H4831 in more than one rifle, my 300 WM prefers the flat base 180 gr pro hunter, but my buddy Dennis has a 300 H&H that prefers the boat tailed 180 gr game king, try them both and see what your rifle likes best.

    Mike

  5. #5
    Basic Member Willoughby's Avatar
    Join Date
    Jul 2011
    Location
    NW Montana
    Age
    65
    Posts
    311
    Ive had really good results with 208 Amax's over 70gr H1000 with WLRM primers
    mild & accurate

  6. #6
    jjdgldaz
    Guest
    thank you all keep them coming

  7. #7
    leatherlunger
    Guest
    berger 230 grain hybrids. it was designed for the 300wm. dont have one not sure if 4831sc or h1000 would b better. Need a 10 twist to stabilize.

  8. #8
    jjdgldaz
    Guest
    worked up some 230 grain bergers. .15 off lands and 66 grains of 4831sc. will post the results.

  9. #9
    leatherlunger
    Guest
    lookin forward to the results, jave been contemplating a 309 wm build since the 230's came out.

  10. #10
    leatherlunger
    Guest
    meant 300 wm **** small buttons

  11. #11
    jjdgldaz
    Guest
    so 230 with 66 grains of powder 4831sc shot .85 at 100 yards. looking to tweek it a little. didnt have as much thud as i thought it would. still hoping it gets better first two where almost on top of each other third was off to the side think i pulled.

  12. #12
    jjdgldaz
    Guest
    Down to .45

  13. #13
    leatherlunger
    Guest

    FCP 110 300 win mag load

    have you had a chance to stretch the lega out on those 230's yet? what kind of MV's you getting? How much drop at 1000?

  14. #14
    jjdgldaz
    Guest
    Farthest I have shot.doc far has only been 300. About inch and half. Was.net a good day at the range to many stupid people around.

Similar Threads

  1. looking for a 165 gr 300 blk or 30-223 load
    By brstevens in forum Ammunition & Reloading
    Replies: 11
    Last Post: 06-26-2016, 05:07 PM
  2. .22-250 load
    By buggybuilder in forum Ammunition & Reloading
    Replies: 14
    Last Post: 07-03-2013, 01:30 AM
  3. 300 WSM Load Lead bullet load data?
    By snowgetter1 in forum Ammunition & Reloading
    Replies: 0
    Last Post: 12-14-2012, 03:41 PM
  4. Anyone load for the 308 x 1½ ?
    By Hammer in forum Ammunition & Reloading
    Replies: 8
    Last Post: 04-30-2011, 03:07 AM
  5. any one load for this ?
    By revolverfan2 in forum Ammunition & Reloading
    Replies: 1
    Last Post: 12-05-2009, 11:11 AM

Members who have read this thread in the last 1 days: 0

There are no members to list at the moment.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •