Reply With QuoteSierra loads for the 300 whisper.....basically the same as the blackout. It'll give you some starting points anyway.
http://www.scribd.com/doc/38398925/S...r-Loading-Data
Is anyone on this form loading for this cartridge, as i have what is needed to start loading for this BUT powder most loadings us Hodgdon Lit Gun looking for something else to use or is that IT
Sierra loads for the 300 whisper.....basically the same as the blackout. It'll give you some starting points anyway.
http://www.scribd.com/doc/38398925/S...r-Loading-Data
H110...
Just been to the range one time this is all i have. I'm going to get a pound Power Pro 300 MP. The H110 worked better then the lil gun in my first test.
LC once fired
125 Gr. NBT
CCI primers
F1 Chrony 10 to 12 feet from muzzle
17.8 H110
2475
2411
2234
2368
2976
18.5 H110
2384
2380
2368
2380
2372
18.5 H110 .10 Jump. Coal 2.205
2403
2482
2422
2400
2424
18 lil gun
2241
2289
error
2264
2334
18.5 lil gun
2932
2822
2365
3035
2519
Subs
208 Amax
Back to the drawing board
9.5 H110
1182
9.2 Lil gun
1323
8.5 lil gun
1159
1085
1139
1311
1091
*Notes* Leave girlfriend at the house next time.
Originally Posted by Ramdiesel
LOL!!!!
its always important to consult with your notes haha
Ive shot mine very little using 30 cal bullets I make, using trailboss powder shooting subs with my suppressor, accuate enough to kill my first yote with it at 75 yrds and btw its soooooooooooooooooo quiet...
Notes: Left GF home cooking supper haha
I've been using AA1680 under a 147gn FMJ for plinking ammo. Suitable loads can be worked up using pretty much any slow pistol or fast rifle powder. If you're loading for a bolt gun rather than an AR it opens things wide since you don' have to worry about gas volume and cycling the action.
300 Blackout = the same as the WW II 30 Carbine.....except the Blackout has pointy tip bullets!! I love shootin my WW-II M-I Carbine. So I would think the Blackout is a good time as well!!
Forum:
300blktalk.com
wch, thanks!!!! Awesome site!!!!
Hey, shouldn't this be in the standard cartridge page being SAMMI and all?
Last edited by 319; 10-10-2012 at 02:41 AM.
Posting Permissions
Bookmarks