Show your tactical/precision rifle/snipery/truck axle Savage!

[bowfishn]

Nuthin' special......

Savage Target action....Pac-Nor 28" SS SM 6.5x55...straight cylinder....8 twist....11* crown...18# as shown

Bushnell 6500 4.5-30x50 Tacticool scope in Burris Signature rings......

Loads are 140 Bergers or 140 A max & H4831sc in Lapua brass & WLP primer...

you can hit schidt a long ways away..........fun LR rig......

Were did you get that long sunshade, Bushnell hasn't made them in for ever.
Nice rifle.

[bowfishn]

New to the forum and to this precision thing. I just put together my first proper bolt gun. Axis II XP SS .308 barreled action. MDT LSS chassis. I know it's entry level compared to a lot of the rigs on here. I figured .308 was good to get started into longer range shooting to learn the basics.

I really like the chassis stocks, lots of options.
Nice rifle.

[Armed in Utah]

Were did you get that long sunshade, Bushnell hasn't made them in for ever.
Nice rifle.

came with scope when I bought it ............

[bajeep93]

Savage 111
Trued action
Nss barrel nut and recoil lug
Benchmark 300 win mag 1/10 twist 24inch.
Muzzle brake and more brake
Rifle basics sav1 trigger
Nightforce 20moa base
Killer innovations rings
H-s precision stock. Bedded
Weaver superslam euro 4-20x50
K G gun kote fde barreled action.
K G gun kote black brake and bolt
190 Berger vld in Norma brass with h1000 2996fps. Shoots lights out.


Sent from my iPhone using Tapatalk

[bajeep93]

Stevens 200 action trued
Nss barrel nut and recoil lug
Benchmark 6.5 creedmoor 24 inch barrel
Rifle basics sav1 trigger
Nightforce 20 moa base
Nightforce ultra light rings
H-s precision stock bedded
Nightforce nsx 3.5-15x56
Action coated sniper gray.
Cdi bottom metal.
Magpul mag.
10 inch form1 titanium suppressor
143 eldx in hornday brass with 4350. 2655 fps.



Sent from my iPhone using Tapatalk

[drybean]

Very nice, grate job !!!!!!!!!!!!!!!!!!!

[huntin1]

From this,



To this,




Barrel swapped to a 22" barrel picked up here from member Rstrick0352

.308 10FP accutrigger
B&C Duramaxx
SSS bolt knob
20moa Farrell Base
TPS TSR-W rings
Nikon Monarch 4x16x42 mildot
Harris swivel bipod
Sig SRD762 Suppressor

[Chrazy-Chris]

Dick's Special 10T in .308 cut down to 18" and threaded dropped in an HS Precision stock. I'm itching to swap into a 260 barrel and I think a CDI bottom metal setup would be sweet on her. I also have a Vortex 6-24 I plan on mounting in some lightweight rings to save some on weight.

Here's how she started out:
Untitled by Chrazy-Chris, on Flickr

And how she currently sits:

IMG_20160130_134340519 by Chrazy-Chris, on Flickr

IMG_20160130_134401460 by Chrazy-Chris, on Flickr

IMG_20160203_203508 by Chrazy-Chris, on Flickr

IMG_20150823_104105490_HDR by Chrazy-Chris, on Flickr

[jeffreybehr]

Old because I've had it a couple months and have shown it here, and new because it's sporting its new Shilen Stainless Select Match 28" barrel.


With NF 5-20 scope.


Took this firsttimer only about an hour with the tools purchased from Northland SS.

[Dave23]

Fresh rebuild on the 308.

[RatMag]

I am diggin that paint ^^^^!! Nice job man!!

DK

[yotesniper66]

10 FCP-SR 6.5 Creedmoor, Manners T2A, Accurate Mag bottom metal, Burris XTR II 4-20x FFP SCR reticle, Seekins 20 moa base and rings. Previously in a B&C Medalist M40 with KMW Loggerhead (now for sale in classifieds).

[Rick_W]

Fresh rebuild on the 308.

Nice build! What stock is that?

[yotesniper66]

Good detail on the paint. Stock looks like a Choate

[XL105]

..,

[Dave23]

Thank you. Yea its a Choate i bought way back when.

[Deadshot2]

This is my Savage "Tactical" that started out as a simple 10T purchased on sale from Cabela's.




A five shot warm-up:



A 15 shot string:



Distance was only 100 yards but the wind was a full value 12 mph @ 90 degrees.

Rifle: Savage 10T Tactical
Barrel: Benchmark 6.5 Creedmoor, 24", 1:8, 3-Groove with Benchmark Tactical Brake
Chassis: MDT Tac-21 w/Magpul PRS stock and MIAD group
Bipod: Atlas PSR
Trigger: OE Savage Accutrigger adjusted to 1#
Anti-Cant Level: US Optics Anti-Cant Folding

Ammo: Lapua .308 Palma Cases reformed to 6.5 Creedmoor
39.5 gr H-4350
BR-4 CCI Small Rifle Benchrest Primer

Scope: NightForce 5-25X56 B.E.A.S.T. on Seekins/Vortex rings



Honrady 140 gr ELD-M @2665 fps

[gmanhawaii]

New FCPL-SR, MDT LSS XL chassis, Magpul PRS stock, Leupold Mark 4 20 MOA Picatinney rail, Burris XTR II 5-25X50, Harris Bi-pod, and soon to be installed American Precision Fat Bastard Gen II muzzle brake

[Bigguns]

How do y'all post pics?

[Rick_W]

How do y'all post pics?

You need to host the picture somewhere else: Photobucket, Image-shack, Facebook.

Once hosted on another site, you can right-click and copy the image from that site - then right-click and paste the image into the reply box of this site.

[ktmracer358]

My first stage of the build. Savage axis .243 heavy barrel with a letherwood 6-24 scope with anti cant bubble level on the rail, a homemade cheek riser, and a rockite reinforced forend.

Sent from my SAMSUNG-SM-G930A using Tapatalk

[gmanhawaii]

How do y'all post pics?

Upgrade your membership and you can post right from your computer.

[huntin1]

I think I'm finally done messing around with this, now it's time to hit the range and see how it shoots.



308 10FP accutrigger
B&C Duramaxx
SSS bolt knob
20moa Farrell Base
TPS TSR-W rings
Vortex Viper HS-T 6-24x50
Harris swivel bipod
Sig SRD762 Suppressor

[jrod1101]

My 1st Savage .308 Custom for FTR Competition. Still putting the components on it and soon will be developing a load.

[IMG][/IMG]

[IMG][/IMG]



[IMG][/IMG]

[S. Blair]

I just finished this one, need to do some load development.
110 flat long action
X-Caliber 24" varmint contour chambered in 6.5x55
Northland recoil lug and nut
Warne steel scope rail
SSS tactical bolt handle
HS Precision stock
CDI bottom metal
Accurate 30-06 mag
Accu-Shot bipod rail
Triad stock pack
AI scope mount
I have my wife's Bushnell Elite Tactical on it now, still need to buy a scope. :)