Page 15 of 16 FirstFirst ... 5111213141516 LastLast
Results 351 to 375 of 385

Thread: Show your tactical/precision rifle/snipery/truck axle Savage!

  1. #351
    Basic Member
    Join Date
    Jan 2013
    Location
    Alabama
    Age
    41
    Posts
    424

    Nice to see another 6.5x55!
    Here is mine:



    Model 111 left hand action
    Action timed and trued by SSS, plus their competition recoil lug
    28 inch Douglas premium air gauged barrel
    Ken farrel scope base
    Ebay extended bolt handle
    Choate ultimate varmiter stock
    CDI bottom metal and ACIS mag
    Barrel threaded and a JP muzzle brake installed
    Vortex Golden Eagle 15-60-52 scope
    Vortex precision matched rings

  2. #352
    Basic Member
    Join Date
    Apr 2017
    Location
    Behind Enemy Lines in WA State
    Posts
    274
    Quote Originally Posted by jrod1101 View Post
    My 1st Savage .308 Custom for FTR Competition. Still putting the components on it and soon will be developing a load.

    [IMG][/IMG]

    [IMG][/IMG]



    [IMG][/IMG]

    Really like your bipod. Does the elevation screw pull from just one side or does it use RH/LH threads so when turned it pulls equally from each side? Actually, I REALLY like it. Good looking 'pod and I'll bet it's solid as all get out.

  3. #353
    New Member
    Join Date
    Dec 2013
    Posts
    2
    Deadshot2, Yes the bipod is awesome they are made here in Arizona by a local person in the east valley of the Phoenix Metropolitan Area. Each one is hand made and Tarey can do custom orders also. The name of the business is FireFox Engineering and the customer service is the best that I have seen. I was referred to him from another shooter. As for the thread pulls equally from each side. I believe the first version did pull from one side but I am not sure. The screw stays inside the threaded tube. Here are a couple other pictures.

    [IMG][/IMG]

    [IMG][/IMG]

  4. #354
    Basic Member
    Join Date
    Mar 2015
    Posts
    184
    Quote Originally Posted by BoilerUP View Post
    CAPTBEACH asked for a dedicated forum, so I figure the least we can do is consolidate these types of builds into a "lookie here!" thread.

    Here are mine:

    Savage 110 action
    Savage 12FV 26" 1:9 223 Remington takeoff barrel (CBI 22" 1:7 light varmint 223AI barrel on order)
    McMillan A5 stock with CDI LA/308 mag DBM
    EGW 20MOA rail, Burris XTR low rings
    Vortex Viper HS 5-15x44


    Savage 10FP action
    Criterion 26" 1:9 varmint contour 260 Remington barrel
    McMillan A5 stock with CDI DBM
    EGW 25MOA rail, Burris XTR low rings
    Bushnell Elite 4200 Tactical 6-24x50 FFP


    Savage FV-SR
    Boyd Tacticool with DIP metal & krylon
    EGW 0 MOA rail, Burris Signature Zee rings with 20MOA inserts
    Weaver GS Tactical 3-10x40
    How much are you into that first gun just barreled action and stock?

  5. #355
    Basic Member BoilerUP's Avatar
    Join Date
    Nov 2010
    Location
    Floyd Co, IN
    Age
    40
    Posts
    1,100
    Quote Originally Posted by Lorenzo View Post
    How much are you into that first gun just barreled action and stock?

    The long action 223?

    Action was my very first deer rifle (270) converted...traded into the 223 bolt head. My cost was zero.

    The barrel in that picture was a takeoff from a 12FV I picked up off Gunbroker for something like $120...reused the OE barrel nut and lug.

    The A5 was a heavy fill single-shot stock I purchased used on SnipersHide, I think $450, and the CDI DBM was something like $250 for the bottom metal and stock inletting.

  6. #356
    Basic Member SageRat Shooter's Avatar
    Join Date
    Nov 2016
    Location
    Oregon
    Posts
    1,192


    260 Remington on a Savage 111
    Boyd Pro Varmint stock
    25" CBI Varmint Contour
    Sightron 6-24x50 FFP- 2MOA reticle

  7. #357
    Basic Member
    Join Date
    Apr 2012
    Posts
    310
    Quote Originally Posted by BoilerUP View Post
    The long action 223?

    Action was my very first deer rifle (270) converted...traded into the 223 bolt head. My cost was zero.

    The barrel in that picture was a takeoff from a 12FV I picked up off Gunbroker for something like $120...reused the OE barrel nut and lug.

    The A5 was a heavy fill single-shot stock I purchased used on SnipersHide, I think $450, and the CDI DBM was something like $250 for the bottom metal and stock inletting.
    Very nice! It's interesting seeing a long action .223 - are there any advantages to this versus a short action?

  8. #358
    Basic Member
    Join Date
    May 2015
    Location
    san clemente, california
    Age
    32
    Posts
    15
    Quote Originally Posted by Dave23 View Post
    Fresh rebuild on the 308.



    The kuiu


    Sent from my iPhone using Tapatalk

  9. #359
    Basic Member
    Join Date
    May 2015
    Location
    san clemente, california
    Age
    32
    Posts
    15
    Model 11 Trophy predator hunter
    -6.5 cm
    -stock 22" barrel that came with the gun
    -NF 20MOA base bedded
    -Seekins 34mm rings
    -Burris XTR II 3-15x50
    -Burris bubble level
    -Triad tactical stock pack
    -Harris HBRMS 6-9" bipod
    -B&C m40 stock w/custom krylon camo paint

    Just put the new stock on two days ago yet to go print groups but with the old 20$ piece of Tupperware it used to have it would consistently print 5 shots at just over 1/2moa @100 off bipods. Extremely anxious to see how much these tighten up!!! All of you have very nice rifles



    Sent from my iPhone using Tapatalk

  10. #360
    Basic Member
    Join Date
    Sep 2011
    Age
    59
    Posts
    308
    I'm thinkin I might be finished changin things for a bit...

    DK


    [B]Savage - Arken Optics - MDT - Seekins - MOΛΩN ΛΑΒΕ[/B]

  11. #361
    Basic Member
    Join Date
    May 2017
    Posts
    89
    Quote Originally Posted by RatMag View Post
    I'm thinkin I might be finished changin things for a bit...

    DK


    What chassis is that

    Sent from my VS995 using Tapatalk

  12. #362
    Basic Member
    Join Date
    Mar 2016
    Posts
    39
    I've had this built for at least 6 months, finally took it our to the range today. I'm not nearly as good as I thought I was. Only had 2, 5 shot groups out of 40 rounds. 20 Hornady 178gr and 20 FGGM 168gr. I had one group of each @ 1". That said, I still love it, lots of room for improvement. The scope is nice as well. Can easily see the size of my groups at 100, I was shooting steel plates at 300 no problem. Just not a group shooter I guess. Could use some better equipment(bags) and bench too. I'll try prone next time.

    http://imgur.com/HHXYE5q


    http://imgur.com/1F500Ps

  13. #363
    Basic Member
    Join Date
    Sep 2011
    Age
    59
    Posts
    308
    @Dan - That is the new MDT ESS chassis. Solid piece of gear! I am impressed with it, and I feel that it is the best chassis offering out there for the money spent!!

    DK
    [B]Savage - Arken Optics - MDT - Seekins - MOΛΩN ΛΑΒΕ[/B]

  14. #364
    Basic Member
    Join Date
    May 2017
    Posts
    89
    Ah ok. Yeah I'm waiting for it to be offered in lefty

    Sent from my VS995 using Tapatalk

  15. #365
    Basic Member
    Join Date
    Jun 2013
    Posts
    2,879
    Quote Originally Posted by RatMag View Post
    @Dan - That is the new MDT ESS chassis. Solid piece of gear! I am impressed with it, and I feel that it is the best chassis offering out there for the money spent!!

    DK
    I had one. Loved the design, but doesn't shoot as well for me as my McMillan A5. So, I had to transition back. I believe it was mostly due to fit and is a little short for me.

  16. #366
    Team Savage S. Blair's Avatar
    Join Date
    Jul 2014
    Location
    Washington
    Posts
    44
    Quote Originally Posted by bunyan_0341 View Post
    Model 11 Trophy predator hunter
    -6.5 cm
    -stock 22" barrel that came with the gun
    -NF 20MOA base bedded
    -Seekins 34mm rings
    -Burris XTR II 3-15x50
    -Burris bubble level
    -Triad tactical stock pack
    -Harris HBRMS 6-9" bipod
    -B&C m40 stock w/custom krylon camo paint

    Just put the new stock on two days ago yet to go print groups but with the old 20$ piece of Tupperware it used to have it would consistently print 5 shots at just over 1/2moa @100 off bipods. Extremely anxious to see how much these tighten up!!! All of you have very nice rifles



    Sent from my iPhone using Tapatalk
    Very nice!

  17. #367
    Basic Member
    Join Date
    Sep 2011
    Age
    59
    Posts
    308
    Quote Originally Posted by LoneWolf View Post
    I had one. Loved the design, but doesn't shoot as well for me as my McMillan A5. So, I had to transition back. I believe it was mostly due to fit and is a little short for me.
    Nothin in the world wrong with a Mc or Manners. I've just got the chassis bug... BAD!!

    DK
    [B]Savage - Arken Optics - MDT - Seekins - MOΛΩN ΛΑΒΕ[/B]

  18. #368
    Basic Member
    Join Date
    Apr 2011
    Posts
    47
    Figured it was an old and a goodie...


    Quote Originally Posted by BoilerUP View Post
    CAPTBEACH asked for a dedicated forum, so I figure the least we can do is consolidate these types of builds into a "lookie here!" thread.

    Here are mine:

    Savage 110 action
    Savage 12FV 26" 1:9 223 Remington takeoff barrel (CBI 22" 1:7 light varmint 223AI barrel on order)
    McMillan A5 stock with CDI LA/308 mag DBM
    EGW 20MOA rail, Burris XTR low rings
    Vortex Viper HS 5-15x44


    Savage 10FP action
    Criterion 26" 1:9 varmint contour 260 Remington barrel
    McMillan A5 stock with CDI DBM
    EGW 25MOA rail, Burris XTR low rings
    Bushnell Elite 4200 Tactical 6-24x50 FFP


    Savage FV-SR
    Boyd Tacticool with DIP metal & krylon
    EGW 0 MOA rail, Burris Signature Zee rings with 20MOA inserts
    Weaver GS Tactical 3-10x40

  19. #369
    Basic Member
    Join Date
    Jun 2015
    Age
    65
    Posts
    31
    luvs my savages yepper i's does
    SB
    my 308

    with its big brother 110BA 338 LM

    my 6.5 CM i put together YEAH!!

    my 250 savage, yes you read it right, 250 savage (loaded with varget, 100gr sierra MK HPBT= 3055 FPS avg .5 MoA)

    my m-96 6.5X55 thats sweet all the way to 1,000 yds

  20. #370
    Basic Member hamiltonkiler's Avatar
    Join Date
    Oct 2018
    Location
    Central NC
    Age
    37
    Posts
    456

    Show your tactical/precision rifle/snipery/truck axle Savage!





    .223 stock savage parts
    Worked over in the shooting shed.


    Sent from my iPhone using Tapatalk

  21. #371
    Basic Member
    Join Date
    Feb 2019
    Location
    Lubbock texas
    Posts
    45
    I shot a 5 shot group I could cover with a quarter with my 6.5 lrp

  22. #372
    Basic Member
    Join Date
    Jan 2019
    Posts
    20
    Lots of cool shooting irons folks

  23. #373
    Basic Member
    Join Date
    Apr 2013
    Posts
    59
    Updated my M10 precision carbine to a MDT XRS chassis. Scope is a Bushnell Tactical LRS 6-24x50. Using Pmag 10 round magazines.

  24. #374
    New Member
    Join Date
    Jun 2020
    Posts
    2
    I have my draw board setup the same way... lol

  25. #375
    New Member
    Join Date
    Dec 2019
    Location
    State of Confusion
    Age
    32
    Posts
    13
    Very nice looking rifles!

    Here is mine. Model 12FV, .223REM, muscle brake muzzle brake, Leupold LRP 6.5-20x50, Talley one piece Rings, EA Brown thumbhole stock that is pillar and glass bedded. Also shown is my high dollar shooting mat. Ha ha. Shooting reloads-BLC-2 powder with a 53 grain Nosler Varmageddon and CCI primers. It’s accurate and I think pretty fast. Was shooting milk jugs of water at 400 yards when this picture was taken. Seeing the splash in the scope never gets old.


Similar Threads

  1. 4,000,000th Savage 110 is 2010 Shot Show Rifle
    By Uncle Jack in forum 110-Series Rifles
    Replies: 20
    Last Post: 01-06-2010, 09:45 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •