Show your tactical/precision rifle/snipery/truck axle Savage!

[Olvi]

Here's my Savage with stock painted OD


And as of now, painted stock in khaki and my larger can on the nose. Still looking for good scope to mount on, drooling on S&B stand at the gunshow didn't help a thing :D

[45BearGun]

I posted this on the custom rifle thread as well.

Love the cam...did you do that, or is it a dip?

[Rockdoc173]

Manners T2s are way better than McMillan A5s. :)

I'm thinking hard about a Manners (for my 110 30-06) as well. What, in your opinion, are the main advantages of the Manners as opposed to McMillan

[BoilerUP]

I'm thinking hard about a Manners (for my 110 30-06) as well. What, in your opinion, are the main advantages of the Manners as opposed to McMillan

I think he was giving me crap, as I sold him that T2 to switch to an A5.

Having previously and now again currently owning both a T2 and A5...they are both super nice stocks and I am happy with both. The palm swell on the T2 is a smidge bigger than the A5, noticeable to me (I have average sized hands) but not really an issue. I've had the opportunity to visit the MCS facility in North Kansas City twice, and their customer service has to be unrivaled in the stock business.

Hard to go wrong with either manufacturer, but Tom Manners is A++++.

[shooterfpga]

Just received my stock today from another member. I need to go to the store as i dont have the right hex key for one of the screws its smaller. When i get back im going to torque it down and then see how well it feeds because looking at my dbm and the aluminum bedding it doesnt look lined up at all but its sitting right where it needs to be and everything dropped right in so far. Im having an issue with my bottom bolt release right now too not sure if its because i wasnt able to screw it all the way in.

[abinok]

[RatMag]

Latest rendition. Finally have my competition rig completed... minus the Phantom Suppressor that is still being held hostage. Currently sitting at 23", but will be chopped back to 18.5" soon. It just feels great, like an extension... just as it should be.

DK

Savage V/T .243 Winchester
Vortex Viper PST 6-24x50 MRAD
Seekins 30MM Medium Rings
Weaver Tactical Scope Rail 20MOA
Manners MCS-T Reverse GAP Custom Camo
Triad Tactical Stock Pack
Harris Bipod Leg Notch
Rifle Basix SAV-1 Trigger (2.1 pounds)
RatMag 10 Round Magazine

[garzanium]

Hello folks- long time Savage owner- first post!

I got my first savage years ago when I had an SKS that I hated! I managed to get a new one in box after pestering the guy who sold it to me since mine did not feed properly..so I went to my nearest pawn shop and traded it for my Savage 300! I have shot 1k steel with 150gr remington cor-lok cheap hunting ammo! it likes 175gr handloads though.


300 Win mag
SSS stock

hack trigger job on the pre-accutrigger(safe is broken and I cant seem to fix it) --it is the NICEST trigger I have ever pulled and yes, its safe-over 2k round through it easily,drop test ect
Bushnell elite 6500 6-30x50 tactical
Vortex bubble level
EGW rail
Harris notched leg swivel bipod
Limbsaver pad that REALLY helps




Just picked this up-- Took it to the range and it groups very tight at 500 yrd WITH TULAMMO STEEL! I Love it--hit a clay pigeon at 500 yards after confirming a tight group with cheap steel!

308 20'' bull barrel Savage
HS precision stock
Nikon 5-16x50 Tactical
Blackhawk bipod that will be replaced by a Harris
Dark Eagle 10rd mags
Oversized tactical knob
EGW rail
Custom modded noodle cheek piece under the pouch and my favorite knife lol






And for fun
DPMS 20'' Bull barrel
RRA 2 stage
magpul stock
vortex level
Larue-Harris bipod-Notched/swivel
Bushnell elite 6500 6-30x50 tactical
EGW rail

old pic here when it had a cheap scope and a qd larue rail


Group shot

[drybean]

Very nice welcome aboard

[LoneWolf]

M116 in 6.5-06 A-Square

M10 308 (waiting on new barrel from Apache)

Axis in 308 18" pipe.

[cowtownup]

[Cat 64]

Moved movedMoved moved

[Cat 64]

[LoneWolf]

Very clean rig!

[Cat 64]

Thanks Wolf. Just posted the specs and some groups in a new thread.

[Digduggy]

Savage 12FLV .223 Mcree G5 Chassis LaRue QD scope mount with Bushnell Elite Tactical 6-24 G2 reticle

[RatMag]

You can check my signature for most of the details. Prairie Dog babysitter... made 'em take nap time at 607 yards on Saturday.

DK




Got her back from the gunsmith today, after having her chopped to 18". Took her out to check velocities, and only lost 120fps average. She is now averaging 2750, and still stabilizes the 105s perfectly. Made my changes in my ballistic calculator, and nailed my target on the 1st shot at 660 yards. Needless to say, I am extremely happy with the results. Nice and light, and easy to handle. Now, if only my suppressor will get here!! Tick, tick, tick...

[Shadow_Grey]

Here is my new addition to the family...just getting started with this one...only have 20 rounds thru it so far.

[WASTINbullets]

[yorketransport]

I built this specifically for tactical matches, but I'll probably never actually shoot in one!




Specs:
-Left hand action
-Mcree Chassis (no shoulder stock)
-19" McGowen Varmint contour 260 Rem barrel
-Killer Innovations Muzzle brake (This is the best brake I've ever shot on one of these pistols!)
-MDT polymer mag. I'm super cheap and thought I'd give one of these a try. It works great but limits OAL to under 2.800"

The idea with this was to run a pistol in rifle matches, but still be able to have a fast follow up shot. For a right handed shooter, the left hand action lets me cycle the bolt without removing my trigger hand from the grip. It's incredibly fast once you get the hang of it.

Andrew

[LoneWolf]

Custom chambered 243win by Apache Gun Works. New precision comp set up.

[drybean]

Looks great nice job

[upSLIDEdown]

111 Long action
X-Caliber from Jim at Apache chambered in 338 Edge
Boyds Pro Varmint, pillared/bedded
Ken Farrell 60MOA base
SWFA 16x42 for now.

[RatMag]

Nice ride!! Man, I wish I had the coin to snag one of those HD's!!

DK

[LoneWolf]

Nice ride!! Man, I wish I had the coin to snag one of those HD's!!

DK

Thanks brother. I got another rig in the works that's really going to break some hearts when it's done. just waiting on some parts and some stuff to sell for the funds!