I recently put several of my rifles back to their original state, one was my Savage 11 in 223. Same barrel, bolt head, etc, as factory. I did use a steel extractor instead of the brass one.

Now my 223 has an ejection issue, it will eject loaded rounds every time, fast or slow. Empty brass every time, IF I move at medium or slow speed. If I work the bolt fast it will eject, ONLY if there is no other rounds in the magazine. If rounds are in the mag, and I work the bolt fast, the empty case drops on top of the other rounds in the receiver.

I filed down the ejector a bit, to no avail. I increased spring tension on the ejector, again to no avail. It has the steel extractor already. Very odd problem, to me.

Suggestions?