Results 1 to 3 of 3

Thread: filling in a b&c stock

  1. #1
    texasgunclass
    Guest

    filling in a b&c stock


    on a B&c medalist stock or any stock has anybody removed the magazine and filled in the mag well with bedding compound? I have the single shot adapter from sss

  2. #2
    Shoot-N-Nut
    Guest
    If I was going to do that I think I would pick up a can of the expanding foam insulation to fill it first. Its a closed cell foam that wont absorb moisture and you can shave it down or sand it down and use some Acraglas to bed right over top of it.

  3. #3
    KRP
    Guest
    Bedding compound is expensive, fiberglass resin is cheap(mix it with lead shot if you want to add more weight).

Similar Threads

  1. filling factory stock
    By adam38654 in forum 110-Series Rifles
    Replies: 9
    Last Post: 09-13-2017, 04:53 PM
  2. Filling accustock inlet gap around sporter barrel
    By smokinjoe in forum 110-Series Rifles
    Replies: 10
    Last Post: 07-17-2017, 10:38 PM
  3. Favorite primer tube filling tool... ?
    By Hammer in forum Ammunition & Reloading
    Replies: 2
    Last Post: 01-15-2016, 08:44 AM
  4. filling axis stock
    By Einstein in forum Axis Series Rifles
    Replies: 14
    Last Post: 08-15-2015, 10:29 AM
  5. Filling in a barrel chanel
    By romad97 in forum 110-Series Rifles
    Replies: 4
    Last Post: 10-20-2014, 09:23 AM

Members who have read this thread in the last 1 days: 0

There are no members to list at the moment.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •