Stevens 200 build

[medic08]

Here is the Stevens 200 I built after a few years of trying to get the parts together. A good friend gave me the action after he decided he didn't have time to build it. I decided I wanted to go with a 6br rifle. I picked up a used McGowen 8 twist barrel. I also used a Bobby Hart long range target stock I picked up from Stockys and it has a Rifle Basix Savage 2 trigger installed. I have the trigger set at 1 pound. I just finished the bedding job Sunday night. So today was the first trip to the range with her. I threw together some Hornady 75gr V-Max bullets with varget and br4 primers just to see how it shoots. So the groups below are without any load development at all. Here is a pic of the rifle and the first 9 shots out of it.



First 3 shots

[devildogandboy]

first off, Welcome to SavageShooters forum!
you did an excellent job on your build. looks very nice and shoots as good as it looks. congrats!

[KBSacto]

I picked up a Savage Stevens 200 in 243, and I'm looking to convert the blind magazine and to a hinged floor plate. Do I need any additional parts beyond the internal box and follower to put it into a Hogue overmolded stock? I went out to Sharp Shooter's Supply and their parts package looks like it has some of the parts I already have.

I put a Rifle Basix SAV-2 on it and all that is left for my budget build is the stock. Any input you have would be most welcome. Thanks.

[devildogandboy]

Welcome to SavageShooters forum.. you may want to start your own thread and you will probably get more helpful advice pertaining to your question.

[ellobo]

If your looking for cost effective in stocks, look at Boyds. 3 different styles in laminate or walnut. Laminate under $100 and Walnut under $120. Finshed and drop ins. I have used one on a Savage and several others on other makes. I am a happy camper.

El Lobo

[gotcha]

Nice shooting rifle indeed.