Results 1 to 8 of 8

Thread: barrel interchange

  1. #1
    olsmokey
    Guest

    barrel interchange


    Haven't done any barrel switching on any of my savages yet. You guys make it sound so easy that I might just give it a try. Where is the best place to get the go no go gauges? And where do get your barrels? Is there someplace on this forum that shows what caliber barrels will interchange without doing any bolt work? IE;[223/204] [25-06/30-06] etc. thanks

  2. #2
    Uncle Jack
    Guest

    Re: barrel interchange

    I just bought gauges for .308/.243 and belted magnum from Midway. A couple of companies have them listed for a few dollars less, but they were also "out of stock". I didn't want to wait until February.

  3. #3
    pa_wdchuckhuntr
    Guest

    Re: barrel interchange

    Midway's probably the best one-stop-shop for firearms components including gauges and cheap barrels. Aside from that there's the member and vendor classifieds.
    If you stick with the "family" calibers you really only need to buy a go guage to cover a wide range of shooting.
    The short action family based on the 308 will cover 243, 260, 270-08, 7mm-08, 308, 338, 358 and possibly the 22-243 middlestead.
    The long action family based on the 30-06 will cover 6mm-06, 25-06, 6.5-06, 270, 280, 30-06, 338-06 and 35 whelen.
    All of the above have a .473 rim. The .222, .223, .204, etc have a .378 rim.

  4. #4
    Basic Member GUNFANATIC's Avatar
    Join Date
    Dec 2006
    Posts
    140

    Re: barrel interchange

    Is this what you're looking for? http://savageshooters.com/SavageForu...c,14935.0.html
    Kelly

  5. #5
    Basic Member
    Join Date
    Jun 2009
    Posts
    286

    Re: barrel interchange

    I'll differ on pa_wdchuckhuntr's post on one minor point:

    The .280 has a different headspace dimension ........

    Regards

    Three 44s

  6. #6
    BillPa
    Guest

    Re: barrel interchange

    Quote Originally Posted by Three44s
    I'll differ on pa_wdchuckhuntr's post on one minor point:

    The .280 has a different headspace dimension ........

    Regards

    Three 44s
    Yeah, the 280 is .050" longer at the shoulder than the '06 family, 2.049" min vs 2.099 for the 280 min.

    Bill

  7. #7
    pa_wdchuckhuntr
    Guest

    Re: barrel interchange

    I'll differ on pa_wdchuckhuntr's post on one minor point:

    The .280 has a different headspace dimension ........
    I figured there'd be one I'd miss. Thanks for the correction.

  8. #8
    olsmokey
    Guest

    Re: barrel interchange

    thanks fanatic, So any caliber that matches your original case size will interchange correct? All .473's all .378's etc. What about the 220 swift [.473] and the 22-250 [.472] thanks guys

Similar Threads

  1. BBl interchange?
    By Arkie in forum Axis Series Rifles
    Replies: 4
    Last Post: 11-27-2016, 02:37 PM
  2. Savage 99: Cartridge interchange
    By Lee Davis in forum Vintage Savage/Stevens/Fox Firearms
    Replies: 1
    Last Post: 05-03-2015, 04:50 PM
  3. Savage 212: Will 220 and 212 bolt heads interchange?
    By oliver88 in forum Savage & Stevens Shotguns
    Replies: 0
    Last Post: 12-28-2014, 03:06 AM
  4. 210 Shotgun interchange?
    By jinx44 in forum 110-Series Rifles
    Replies: 1
    Last Post: 06-20-2012, 12:57 PM
  5. accustock wedge vs nonwedge interchange
    By snowin in forum 110-Series Rifles
    Replies: 0
    Last Post: 12-06-2011, 12:23 AM

Members who have read this thread in the last 1 days: 0

There are no members to list at the moment.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •