Results 1 to 2 of 2

Thread: .221fb Striker

  1. #1
    Basic Member
    Join Date
    Aug 2007
    Location
    Brushy Mtns, NC
    Posts
    618

    .221fb Striker


    When Sinman gets the barrel back to me, want to try some heavy bullets in a .221fb. It will be screwed on a striker action with 14" barrel, 8 twist. Haven't found data for bullets over 50 grain, and those shoot great. Is there enough case capacity to seat some heavier bullets? The 50 grains may be enough for steel anyway, new to shooting striker.

  2. #2
    308law
    Guest

    Re: .221fb Striker

    If you can load them out a little I would think there is enough case capacity, you might use a little slower powder than normal, Lil Gun, H110, IMR4227 might be a little fast for heavy bullets.

Similar Threads

  1. CZ Switch Barrel .221fb
    By Appleseed in forum Non-Savage Firearms Discussion
    Replies: 4
    Last Post: 07-25-2017, 05:33 PM
  2. New Nosler 221FB brass formed to 20 Vartarg?
    By range rat in forum Ammunition & Reloading
    Replies: 6
    Last Post: 01-06-2014, 10:00 AM
  3. .221fb Striker is a ringer
    By Appleseed in forum Bolt Action, Falling Block & Rotary Breech Pistols
    Replies: 2
    Last Post: 10-04-2012, 04:22 PM
  4. 8 twist .221fb Load Data
    By Appleseed in forum Ammunition & Reloading
    Replies: 3
    Last Post: 10-04-2012, 01:13 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •