Results 1 to 5 of 5

Thread: Manners t4a

  1. #1
    Basic Member
    Join Date
    Apr 2011
    Posts
    22

    Manners t4a


    Hello,
    I have a savage 111 that is a non acutrigger. It is set up as a blind mag right now. Im looking at a manners t4a that is set up for a centerfeed dbm. They said that these are for a bottom bolt release. Even if i get a mag system set up for a side release will it still fit this stock? Oh my action is a centerfeed.

    Thanks
    Chance

  2. #2
    Basic Member BoilerUP's Avatar
    Join Date
    Nov 2010
    Location
    Floyd Co, IN
    Age
    40
    Posts
    1,100

    Re: Manners t4a

    Did you talk to Matt @ Manners, or maybe Tom himself? They could probably give you the answer very quickly.

  3. #3
    Basic Member
    Join Date
    Apr 2011
    Posts
    22

    Re: Manners t4a

    Yea i did get an email back from matt and wasnt sure but didnt thing they would work

  4. #4
    Basic Member
    Join Date
    Sep 2011
    Age
    59
    Posts
    308

    Re: Manners t4a

    From the previous Manners MCS-T stock that I had, it was originally for side bolt release. There was only a slight bit of inletting in the trigger area that had to be done for it to work. Tom asked me what all I did to make it work, and I sent him some pictures of the modifications. My stock was for the short action, but I don't believe that your long action would be any different in regards to whether or not it would work.

    So to make a long story into a short answer... Yes, I do believe it will work.

    DK
    [B]Savage - Arken Optics - MDT - Seekins - MOΛΩN ΛΑΒΕ[/B]

  5. #5
    Basic Member
    Join Date
    Apr 2011
    Posts
    22

    Re: Manners t4a

    So you think that a stock that is for a bottom bolt release will work with a side release with little modification? Hate to spend that much if it isnt going to work.

    Thanks
    Chance

Similar Threads

  1. Manners MCS-EH2
    By M10-PC in forum 110-Series Rifles
    Replies: 0
    Last Post: 10-26-2017, 01:54 PM
  2. Anyone have a Manners EH6 or EH8?
    By J.Baker in forum Other Firearm and Shooting Accessories
    Replies: 0
    Last Post: 07-21-2017, 12:06 AM
  3. Manners EH1
    By Luke45 in forum 110-Series Rifles
    Replies: 6
    Last Post: 02-17-2014, 11:24 PM
  4. manners
    By calib in forum 110-Series Rifles
    Replies: 5
    Last Post: 01-18-2013, 04:23 PM
  5. McMillan A5 vs. Manners T2
    By BoilerUP in forum 110-Series Rifles
    Replies: 7
    Last Post: 06-14-2012, 02:51 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •